Compressors

Showing 1 - 24 of 34 products

Save $56.70

Embraco Embraco NT6230U Medium Temp Compressor (1 1/4 HP, R290)

$573.20 $629.90

No reviews

In stock

Save $100.00

Embraco Embraco NEU6220U Medium Temp Compressor (3/4 HP, R290)

$409.99 $509.99

No reviews

In stock

Save $99.10

Embraco Embraco Medium Temp Compressor 1/2 HP R290 NEU6214U

$345.90 $445.00

No reviews

In stock

Save $68.96

Embraco Embraco Medium Temp Compressor 1/4HP R290 NEU6212U

$273.99 $342.95

No reviews

In stock

Save $106.95

Embraco Embraco Medium Temp Compressor 1/4HP R290 EMX6152U

$236.00 $342.95

No reviews

In stock

Save $24.09

Embraco Embraco Low Temp Compressor 1/4HP R290 NT2180U

$485.90 $509.99

No reviews

In stock

Save $48.99

Embraco Embraco Low Temp Compressor 1/4HP R290 NT2210U

$581.00 $629.99

No reviews

In stock

Save $55.35

Embraco Embraco Low Temp Compressor 1/4HP R290 NEU2155U

$287.60 $342.95

No reviews

In stock

Save $65.05

Embraco Embraco Low Temp Compressor 1/4HP R290 EMC3130U

$277.90 $342.95

No reviews

In stock

Save $78.95

Embraco Embraco NEK6181GK Compressor

$264.00 $342.95

No reviews

In stock

Save $102.96

Embraco Embraco Compressor R404a Med 1/3hp | EMT6165GK

$239.99 $342.95

No reviews

In stock

Save $9.25

Embraco Embraco Low Temp Compressor 3/4HP R290 NEU2168U

$333.70 $342.95

No reviews

In stock

Save $92.96

Embraco Embraco nek6165G / EMT 6165GK Compressor

$249.99 $342.95

No reviews

In stock

Save $47.00

Embraco Embraco Aspera Compressor FF8.5HBK

$295.95 $342.95

No reviews

In stock

Save $25.75

Embraco Embraco Aspera Compressor FFI10HAK

$317.20 $342.95

No reviews

In stock

Save $33.47

Embraco Embraco Aspera Compressor EMY6170Z

$216.48 $249.95

No reviews

In stock

Save $28.15

Embraco Embraco Aspera Compressor NEU6187Z

$245.80 $273.95

No reviews

In stock

Save $21.96

Embraco Embraco Aspera Compressor NEU6210Z

$269.99 $291.95

No reviews

In stock

Save $27.45

Embraco Embraco Aspera Compressor NEU6212Z

$274.50 $301.95

No reviews

In stock

Save $31.25

Embraco Embraco Aspera Compressor NEU6214Z

$287.70 $318.95

No reviews

In stock

Save $52.59

Embraco Embraco Aspera Compressor NT6217Z

$607.40 $659.99

No reviews

In stock

Save $114.55

Embraco Embraco Aspera Compressor NJ6226Z

$607.40 $721.95

No reviews

In stock

Save $52.95

Embraco Embraco Aspera Compressor NEU6212GK

$261.00 $313.95

No reviews

In stock

Save $47.35

Embraco Embraco Aspera Compressor NEU6215GK

$266.60 $313.95

No reviews

In stock

Page 1 / 2Next

HVAC & Refrigeration Compressors Australia | Copeland, Embraco, SECOP | HVACShop

Looking for a reliable HVAC-R compressor replacement that matches the job without guesswork? This collection brings together trade-used compressor options (including common commercial refrigeration and HVAC applications), plus the supporting gear you typically need for a proper changeout.

Tip: Before you order, grab the old compressor data plate details (model, refrigerant, voltage, LRA/starting specs, mounting/connection style) and match from there. If you’re unsure, our team can help you narrow it down.

How to choose the right compressor (without “nearly right” swaps)

Most compressor call-backs come from a mismatch or an unaddressed root cause. Use this practical selection order:

Application & duty: cabinet, display fridge, cool room, freezer, split/ducted system, etc. (LBP/MBP/HBP where relevant).
Refrigerant match: don’t assume blends are interchangeable—match the system refrigerant and oil requirements.
Electrical match: supply (e.g., 240V single-phase), start components, and protection/overload requirements.
Capacity & operating conditions: compare capacity at similar evaporating/condensing conditions (not just “HP”).
Connections & mounting: braze vs rotalock, pipe sizes, base plate/feet, and clearance for service.

If you’re specifically chasing Embraco replacements, browse current Embraco options here: Embraco compressors.

Compatibility checklist (save this before checkout)

What to check	Where to find it	Why it matters
Compressor model number	Old data plate / service docs	Fastest way to match performance & fit
Refrigerant	System label / job notes	Affects oil type, pressures, and compliance
Duty (LBP/MBP/HBP)	Specs / application chart	Wrong duty = poor pull-down or overheating
Voltage / phase	Nameplate	Prevents miswiring and nuisance trips
Start components	Existing wiring/components	Capacitor/relay mismatch can shorten life
Connections & mounting	Visual check + measurement	Stops fitment surprises on install day

What to replace with the compressor (best-practice changeout basics)

A compressor changeout is rarely “swap and go”. To reduce contamination risk and repeat failures, many techs will also review:

Filter drier (moisture/acid control) – see related service parts in Accessories & Spares
System cleanliness (burnout/acid management where applicable)
Evacuation quality (deep vacuum + stable micron reading)
Charge accuracy (weigh-in with a charging scale, verify with gauges)
Leak checks & pressure testing (correct procedures and equipment)

Tools & consumables commonly used for compressor work

If you’re building out the job kit (or replacing tired gear), these collections help you cover the full workflow:

Recovery units for compliant recovery and service work
Vacuum pumps + vacuum pump oil for clean evacuations
Refrigerant gauges/manifolds + refrigerant hoses
Refrigerant scales for accurate charging
Nitrogen regulators for pressure testing workflows

Guides & resources (Australia-focused)

Compressor FAQs

How do I size a compressor correctly?

Start with the existing model and application. If you’re changing system conditions, you’ll need proper load calculations and performance data at relevant evaporating/condensing temps. When in doubt, match the original specification and address the failure cause before re-commissioning.

Can I replace a “Danfoss” compressor with SECOP?

In many cases, yes—because SECOP branding is commonly seen where “Danfoss” replacements used to appear. The key is matching refrigerant, duty (LBP/MBP), electrical specs, and connection/mounting. Use the SECOP and Danfoss→SECOP guides above for practical matching steps.

Should I replace the filter drier when changing a compressor?

Common practice is to replace the drier as part of a compressor changeout to help manage moisture/contaminants and protect the new compressor. Browse service parts in Accessories & Spares.

What else should I check so the new compressor doesn’t fail again?

Check for the root cause: restrictions, under/overcharge, airflow issues, non-condensables, moisture, electrical problems, or burnout/acid contamination. Then commission properly: evacuation quality, leak checks, and accurate charging using gauges and scales.

Do you ship compressors Australia-wide?

Yes—HVACShop ships within Australia. Carrier and delivery time depend on item and destination. See Shipping & Returns for current details.

Is refrigerant handling regulated in Australia?

Yes. If work involves handling refrigerant or activities where refrigerant could be emitted, it must be done by an appropriately licensed person. Refer to ARCtick refrigerant handling licence guidance and relevant Australian Government information.

Business & contact

Business: HVACShop.com.au
ABN: 98 351 143 900 — verify via ABN Lookup
Email: hvacshop.com.au@gmail.com
Phone: 0412 333 115
Support hours: Mon–Fri, 9:00am–5:00pm AEST (email replies typically within 24 hours, Mon–Fri)
Contact page: Contact HVACShop

Shipping, dispatch & carriers

Carriers used: Australia Post, TNT, Hunter Express, Toll Priority (varies by location/item)
Dispatch target (in-stock): typically within ~3 business days
Delivery expectations: often 1–3 business days to capital cities, up to 7+ business days for regional/remote
Policy page: Shipping & Returns

Returns & warranty

Warranty: Products are backed by manufacturer warranty (terms vary by brand/product). See policy details.
Returns: Change-of-mind and other eligibility/fees are outlined on the Shipping & Returns page.

Secure payments

Checkout supports major secure payment options including card and express wallets (e.g., Visa/Mastercard/Amex and Apple Pay/Google Pay), plus PayPal and buy-now-pay-later options (where available).

Compliance disclaimer (Australia)

Refrigerant handling and certain RAC work is regulated in Australia. For any work involving refrigerant (or where refrigerant could be emitted), use an appropriately licensed refrigeration & air-conditioning technician and follow official guidance (ARCtick / Australian Government).

Content governance

Author: HVACShop Content Team (trade-focused eCommerce)
Reviewer: HVACShop Compliance Editor (AU RAC compliance checks)
Last updated: 2026-01-13 (AEST)

Compressors

HVAC & Refrigeration Compressors Australia | Copeland, Embraco, SECOP | HVACShop

How to choose the right compressor (without “nearly right” swaps)

Compatibility checklist (save this before checkout)

What to replace with the compressor (best-practice changeout basics)

Tools & consumables commonly used for compressor work

Guides & resources (Australia-focused)

Compressor FAQs

Business & contact

Shipping, dispatch & carriers

Returns & warranty

Secure payments

Compliance disclaimer (Australia)

Content governance

Sources

Recently viewed

Contact HVAC Supply Shop – Expert HVAC Support in Australia