Fieldpiece Accessories

15 products

Showing 1 - 15 of 15 products

Fieldpiece Accessories – Leads, Cases, Tool Bags & Replacement Parts

Keep your Fieldpiece tools working hard for longer. This collection brings together genuine Fieldpiece accessories – from silicone test leads and removable tips to meter cases, tool bags, manifold spares, leak detector filters and CO sensors – so you can keep your gear accurate, protected and ready for the next job.

What You’ll Find in the Fieldpiece Accessories Collection

Test Leads, Tips & Shorting Cables

Make the most of your Fieldpiece multimeters and electrical testers with purpose-designed leads and tips:

Standard silicone test lead sets (ASLS2) – flexible, silicone-insulated leads that handle extreme heat and cold better than vinyl, and stay supple in winter.
Deluxe removable tips (ADLS2) – swap tips instead of whole leads and keep insulation and strain relief in good shape.
Small leads with alligator clips (ASA2) and shorting cables (ADA2) – ideal for temporary connections, bridging and hands-free testing inside switchboards and control panels.

Silicone-insulated leads are strongly recommended for professional electrical testing, especially in the harsh Australian climate.

Manifold Hoods & Plunger Seal Kits

Keep your Fieldpiece digital manifolds sealing properly and protected on site:

Plunger seals and handles kits (RSMANK6 and RSMANK8) – replacement plunger assemblies that restore positive sealing on compatible SMAN manifolds.
ANC11 manifold hood – shields your manifold from rain and direct sun so you can still read the screen and protect the electronics on hot or wet days.

Tool Bags & Meter Cases

Fieldpiece tool bags and cases are designed around HVAC work – tight roof spaces, ladders and busy service vans:

BG44 service tool bag – a compact, rugged single-strap bag with an elevated tool rack, padded meter pockets, magnetic tray and storage for your everyday HVAC tools.
Soft and padded cases (ANC1, ANC4, ANC8, ANC9) – meter and scale cases that protect your instruments from knocks and weather between jobs.

For a wider range of storage options, explore our Tool Bags & Cases collections as well.

Leak Detector Filters, O-Rings & CO Sensors

Gas detection performance depends on the filters and sensors in front of the electronics. This collection includes:

RFL2 leak detector filters & O-rings – help keep dust, oil and contaminants away from the sensor so your detector can pick up small leaks reliably.
RCM4 carbon monoxide smart sensor replacements – maintain accuracy and sensitivity on compatible Fieldpiece CO meters and combustion analysers.

Always follow Fieldpiece’s recommended sensor replacement intervals and test procedures, especially for safety-critical instruments such as CO meters and leak detectors.

Airflow & Pressure Accessories

Round out your airflow and pressure kit with accessories such as:

ASP2 150 mm Pitot tubes – pair with a differential manometer to measure duct velocity and calculate airflow through grilles and ductwork.

These accessories work especially well with Job Link® manometer probes and other Fieldpiece instruments featured in our Fieldpiece HVAC Tools for Pros collection.

How to Choose the Right Fieldpiece Accessory

A simple way to choose is to start with the Fieldpiece tool you are supporting:

SMAN manifolds: choose RSMANK6/RSMANK8 plunger kits and the ANC11 hood to keep seals fresh and the manifold usable in bad weather.
Multimeters and electrical testers: ASLS2 and ADLS2 silicone leads and tips, plus ASA2 and ADA2 clip/shorting sets, will cover most day-to-day electrical diagnostics.
Leak detectors and CO meters: match RFL2 filters and RCM4 CO sensors to your exact model number before ordering.
Airflow and pressure kits: bundle ASP2 Pitot tubes with Job Link® manometers and the right accessory heads and handles.

For a full overview of the brand, take a look at Fieldpiece HVAC Tools for Pros and our blog Fieldpiece Australia: Complete Tool Guide 2025 .

Trade Tips & Safety for Electrical Accessories

Inspect leads before every job – check for nicks, exposed conductors, cracked insulation or loose tips and replace damaged leads immediately.
Use the correct category rating – match your leads and meters to the voltage and CAT rating required for the environment you’re working in.
Follow Fieldpiece manuals – always match accessory part numbers to your instrument model and observe all usage and replacement instructions.
Replace sensors on schedule – CO and refrigerant leak detector sensors drift over time; change them as recommended and function-test regularly.

Fieldpiece Accessories – Frequently Asked Questions

What counts as a Fieldpiece accessory?

Fieldpiece accessories include test leads and tips, manifold hoods and plunger seal kits, meter and scale cases, tool bags, Pitot tubes, leak detector filters, O-rings and CO sensor cartridges designed to work with specific Fieldpiece instruments.

Will these accessories fit any Fieldpiece tool?

Most accessories are model-specific. Always check the model number on your Fieldpiece tool against the accessory description or manual before ordering to ensure compatibility.

Can I use Fieldpiece test leads with non-Fieldpiece multimeters?

In many cases you can, as long as the plug size and spacing match and the voltage and CAT ratings of the leads are equal to or higher than those required by your meter. Always check both manuals and only use leads that meet the relevant safety standards.

How often should I replace test leads, filters and CO sensors?

Inspect test leads before each use and replace them if damaged. Replace leak detector filters and O-rings when they become contaminated or worn, and change CO sensors according to Fieldpiece’s recommended service life and test schedule.

Which Fieldpiece accessories are best for organising a service van?

The BG44 service tool bag combined with ANC-series meter and scale cases works well for organising everyday HVAC tools and instruments in a service van. You can add other tool bags and cases from our dedicated storage collections as needed.

Are these accessories suitable for work on R32 and other A2L refrigerants?

Most accessories here (leads, cases, Pitot tubes, bags, filters) do not contact refrigerant directly. R32 and A2L suitability is primarily determined by the main tool – such as the vacuum pump, manifold or leak detector. Always follow the tool manufacturer’s instructions and current Australian refrigerant handling requirements.

Showing 1 - 15 of 15 products

Save $41.50

Fieldpiece Fieldpiece Plunger Seals And Handles Kit For Sman400 Manifolds - Rsmank8

$105.45 $146.95