New Arrivals

Showing 1 - 24 of 2162 products

Bonaire Bonaire Celair Wall Controller

$308.00

Sold out

Braemar Braemar Digital Wall Thermostat

$186.99

In stock

Brivis Brivis Gas Valve Earth Wiring Loom HCCA621

$49.50

In stock

Brivis Brivis Rectifier Plug for VK Gas Valves

$53.90

In stock

Braemar Minisit Gas Valve Control Knob

$49.50

In stock

Bonaire Bonaire Piezo Gas Heater Ignitor

$49.50

In stock

Testo Testo Reference Oil for Cooking Oil Testers

$87.99

In stock

Brivis Brivis Heater Overheat Switch 90C Short Bracket

$49.50

In stock

Brivis Brivis Ducted Heater Over Temperature Switch 110C Yellow Dot (Copy)

$49.50

In stock

Bonaire Bonaire Vulcan Quasar Goyen 240V Coil

$98.99

In stock

Testo Testo Flue Gas Analyser Service & Calibration Package - 320 Express

$941.60

In stock

Testo Testo Flue Gas Analyser Service & Calibration Package - Express

$660.00

In stock

Testo Testo Flue Gas Analyser Service & Calibration Package (Testo 320, 300)

$646.80

In stock

Testo Testo 310 Flue Gas Analyser Service & Calibration Package

$411.40

In stock

Testo Testo Flue Gas Analyser Service & Calibration Package

$689.70

In stock

Testo Testo Flue Gas Analyser Service & Calibration Package - O2, CO, CO2, NO, NO2

$4,140.40

In stock

Testo Testo Flue Gas Analyser Service and Calibration Package

$2,506.90

In stock

Testo Testo Flue Gas Analyser Service & Calibration Package

$2,601.50

In stock

Testo Testo Flue Gas Analyser Service & Calibration Package

$2,838.00

In stock

Testo Testo Flue Gas Analyser Service & Calibration Package

$1,536.70

In stock

Testo Testo Send-in Service-5 & Calibration for O2 & NO Flue Gas Analysers

$1,064.80

In stock

Testo Testo Flue Gas Analyser Service & Calibration Package

$2,957.90

In stock

Testo Testo Flue Gas Analyser Service & O2/CO/NO Calibration

$2,200.00

In stock

Testo Testo Flue Gas Analyser Service & Calibration Package

$1,467.40

In stock

Page 1 / 91Next

New Arrivals – Latest HVAC Tools & Aircon Cleaning Gear

Looking for the freshest gear in the HVAC game? You’re in the right place. The HVAC Shop New Arrivals collection pulls together the latest HVAC tools, air conditioning cleaning kits and safety gear hitting our shelves – all chosen for real-world use by Aussie technicians working in tough conditions.

Whether you’re upgrading your everyday tool bag, setting up as a new tradie, or chasing a specialty instrument for a tricky install, these just-landed products are designed to help you work faster, safer and more accurately on every job.

What You’ll Find in New Arrivals

This collection updates automatically as fresh stock lands, so you’ll always see the newest HVAC tools first. Use the filters to narrow down by category, brand or price and quickly find what you need from hundreds of products across:

Test & measurement tools – digital manifolds, clamp meters, thermometers, vac gauges and more from leading brands, all designed to help you diagnose faster and charge systems accurately. Explore our full Test & Measurements range for more options.
Vacuum pumps, oils & recovery units – new models and accessories to help you evacuate and recover refrigerant efficiently. For deeper browsing, check Vacuum Pumps and Recovery & Evacuation.
Aircon cleaning bags, kits & Hydrocell gear – wall-mounted cleaning bags, drip trays, high-pressure spray guns and air conditioner cleaning kits that make coil cleaning quicker and less messy. You’ll also find Hydrocell accessories within Cleaning & Preventive Maintenance.
Leak detection & system protection – sensitive electronic leak detectors, UV dyes, system additives and sealants to help track down and prevent refrigerant leaks.
Safety equipment for working at height – safety harnesses, fall arrest lanyards and high-vis gear to keep you compliant on roofs and in plant rooms. Explore more in our Safety Equipment collection.
Tool bags, cases & kits – rugged storage solutions and curated tool kits to keep your new gear organised and protected on site. See Tool Bags & Cases and Tool Kits for more ideas.

New arrivals are shown by default with the newest products first (sort: Date, new to old), so what you see at the top of the page is the most recently added stock.

Who This Collection Is For

The New Arrivals collection is built for:

HVAC-R technicians and contractors who want the latest tools and test gear to stay ahead of changing standards and refrigerants.
Apprentices building a modern kit from day one, with quality gear that will last beyond trade school.
Facility managers and maintenance teams who need reliable, professional tools for commercial plant, supermarkets or light industrial sites.
DIY users who are comfortable with basic maintenance like cleaning indoor units or using simple electrical testers – while leaving any refrigerant and high-voltage work to a licensed technician.

In Australia, anyone working directly with fluorocarbon refrigerants (charging, recovering, commissioning or decommissioning systems) must hold an appropriate Refrigerant Handling Licence under the national scheme administered by the Australian Refrigeration Council (ARC). Always use or consult a licensed technician for refrigerant-related work and system installation.

Why Buy New HVAC Tools from HVAC Shop?

HVAC Shop is a specialist Australian HVAC-R retailer focused entirely on tools, instruments and accessories for air conditioning and refrigeration professionals.

Trusted brands – including Fieldpiece, Testo, Mastercool, Hilmor, Robinair, Hydrocell, Uni-T, Yellow Jacket and more, all backed by local support and manufacturer warranties.
Stocked in Australia – we ship from local warehouses using major carriers like Australia Post, TNT, Hunter Express and Toll to deliver quickly across metro and regional areas.
Fast dispatch – in-stock items generally leave the warehouse within a few business days, with typical delivery times of 1–3 working days to capital cities and longer for remote locations.
Flexible payments – pay securely via major cards, PayPal and Buy Now Pay Later options such as Afterpay and ZipPay.
Trade-friendly support – got a question about compatibility, capacity or a specific application? Our team is reachable by phone or email and actually understands HVAC work in the Aussie climate.

How We Choose New HVAC Tools

Every product that appears in New Arrivals goes through a basic vetting process before it’s listed. Our focus is on gear that:

Meets Australian safety and compliance expectations when used correctly and in accordance with manufacturer instructions.
Supports accurate diagnosis and efficient operation – for example, quality test instruments, proper vacuum equipment and leak detection tools that help systems run closer to design efficiency.
Is practical for real job sites – robust housings, clear displays and smart accessories that make work quicker in ceilings, on roofs and in tight plant rooms.
Comes from reputable brands with proven track records in the HVAC-R industry.

Good tools, used correctly, support energy-efficient operation. Government guidance for heating and cooling highlights the importance of correct installation, regular maintenance and appropriate system selection for reducing energy use and running costs.

Tips for Choosing the Right New Tool

1. Match the tool to the system and refrigerant

Modern air conditioners and refrigeration plant increasingly use lower-GWP refrigerants such as R32 and other alternatives. Always check that your gauges, hoses, vacuum pumps, leak detectors and recovery units are rated and compatible with the refrigerants you work with, and follow Australian standards and ARC guidance for handling and recovery.

2. Think about the type of work you do most

If you mainly work on splits and small commercial jobs, a compact digital manifold, a reliable vacuum pump and a sturdy tool bag might be the best investment. If you’re more focused on supermarket, cold room or plant work, you may prioritise leak detection, refrigerant recovery and advanced electrical test equipment.

3. Prioritise safety and working at height

Installing and servicing condensers on roofs and high façades makes safety gear non-negotiable. New arrivals in safety harnesses and fall protection offer added comfort and confidence when you’re working at height. Always follow your site’s safety procedures, local WHS regulations and any harness manufacturer instructions.

4. Keep maintenance and cleaning in mind

Regular cleaning of indoor and outdoor units keeps systems running more efficiently and can improve comfort. Government energy advice recommends keeping air conditioner components clean and booking regular servicing to optimise performance. New aircon cleaning bags, drip trays and Hydrocell accessories in this collection make that work less messy and more controlled.

5. Plan your kit around portability

A well-planned kit reduces trips to the ute and speeds up every call-out. Consider pairing new tools from this collection with a dedicated tool bag or case so the instruments you use most are always ready to grab and go.

FAQs – New HVAC Tools & New Arrivals

What kind of products appear in the New Arrivals collection?

New Arrivals includes any freshly listed HVAC-R tools, instruments and accessories added to HVAC Shop. That can range from digital manifolds, vac pumps and leak detectors through to aircon cleaning bags, drip trays, safety harnesses and Hydrocell spray guns.

If you need more options in a specific category, you can always jump across to related collections such as Test & Measurements, Cleaning & Preventive Maintenance, Safety Equipment or Tool Kits.

How often is the New Arrivals collection updated?

The collection updates regularly as new items land in our warehouse or are added to our catalogue. By default, it’s sorted by Date, new to old, so the first products you see are the most recently added.

For newly released instruments or high-demand tools, we recommend checking this page frequently or subscribing to the newsletter for updates on launches and offers.

Are these tools suitable for DIY use, or only licensed technicians?

Many products in New Arrivals – such as cleaning bags, drip trays, some electrical testers and tool storage – can be used by confident DIYers or homeowners following safety directions.

However, any work involving refrigerant (charging, recovery, commissioning or decommissioning) must be carried out by a licensed technician holding a valid Refrigerant Handling Licence under Australian law. If you’re unsure whether a particular tool is appropriate for DIY use, talk to your installer or contact our team before purchasing.

How long does delivery take for new arrival HVAC tools?

For most in-stock items, HVAC Shop aims to dispatch orders from the warehouse within around three business days. From there, typical delivery is about 1–3 working days to capital cities and longer to regional or remote areas, depending on the carrier.

For urgent jobs or time-critical deliveries, get in touch via our Contact Us page before ordering so we can confirm stock and the best shipping option for your location.

What is your returns and change-of-mind policy on new arrivals?

New arrivals follow the same Shipping & Returns policy as the rest of the store. In general, change-of-mind returns must be requested within a short period after delivery, with items unused and in original packaging, and return freight covered by the customer.

For full details on return timeframes, restocking fees and heavy/bulky freight surcharges, please review our Shipping & Returns page before placing your order.

Can I get a quote or help planning a full HVAC tool kit?

Yes. If you’re kitting out a van, setting up a new team or standardising tools across multiple techs, we can help you put together a practical, brand-consistent kit from our latest arrivals and core catalogue.

Use our Personalised HVAC Tool Quote form or reach out via the Contact Us page and we’ll work with you on suitable options, availability and pricing.

Trust, Support & Compliance

Author: HVACShop.com.au eCommerce & Content Team
Technical basis: Content informed by Australian Government guidance on energy-efficient heating and cooling and public information from the Australian Refrigeration Council on refrigerant handling and licensing. This page is general information only and does not replace on-site advice from a licensed RAC technician.

Business details: HVACShop.com.au • ABN 98 351 143 900 • Email: hvacshop.com.au@gmail.com • Phone: 0412 333 115 (Mon–Fri, 9:00am–5:00pm AEST).

Need help? For questions about tools, orders or delivery, visit our Contact Us page, check the HVACShop FAQ, or review Shipping & Returns for detailed freight and refund information.

Independent guidance & trust signals: For general advice on reducing heating and cooling energy use in Australian homes and businesses, see energy.gov.au – Heating and Cooling . For refrigerant licensing information and to verify technicians, visit the Australian Refrigeration Council’s Look for the Tick

Last updated: 2025-12-17 (AEST)

New Arrivals

New Arrivals – Latest HVAC Tools & Aircon Cleaning Gear

What You’ll Find in New Arrivals

Who This Collection Is For

Why Buy New HVAC Tools from HVAC Shop?

How We Choose New HVAC Tools

Tips for Choosing the Right New Tool

1. Match the tool to the system and refrigerant

2. Think about the type of work you do most

3. Prioritise safety and working at height

4. Keep maintenance and cleaning in mind

5. Plan your kit around portability

FAQs – New HVAC Tools & New Arrivals

What kind of products appear in the New Arrivals collection?

How often is the New Arrivals collection updated?

Are these tools suitable for DIY use, or only licensed technicians?

How long does delivery take for new arrival HVAC tools?

What is your returns and change-of-mind policy on new arrivals?

Can I get a quote or help planning a full HVAC tool kit?

Trust, Support & Compliance

Recently viewed

Contact HVAC Supply Shop – Expert HVAC Support in Australia