Brivis Gas Valve Earth Wiring Loom HCCA621

This Brivis earth wiring loom is a critical replacement part for your Brivis ducted gas heater's gas valve. It helps maintain the safe and reliable operation of the heating system, especially after servicing or if the original loom has seen better days.

Anyone who's spent a summer afternoon tracing electrical faults in a hot roof space knows the value of having the right, genuine loom on hand.

Best For

HVAC techs, gasfitters, and competent DIY owners working on Brivis ducted gas heaters.

Compatibility

This wiring loom is specifically designed for Brivis ducted gas heaters that use the HCCA621 gas valve. It's an original Brivis part, P/N: 80023172 (also referenced as B023172), ensuring a direct fit and reliable performance. If you're running a different model, check fittings and specs before ordering.

Features

• Direct replacement for Brivis HCCA621 gas valve earth wiring looms.
• Genuine Brivis part (P/N: 80023172, B023172) for guaranteed fit and function.
• Ensures correct earthing and electrical connection for the gas valve.
• Helps prevent potential electrical faults and promotes safe operation.

What's in the Box

• One (1) Brivis Earth Wiring Loom HCCA621 (P/N: BS80023172 / B023172).

Using It on the Job

1. Always isolate power to the ducted gas heater at the main switchboard and perform lockout/tagout procedures before commencing work.
2. Identify the existing earth wiring loom connected to the gas valve. Take photos if needed for reassembly.
3. Carefully disconnect the old loom, noting its connection points.
4. Connect the new Brivis Earth Wiring Loom HCCA621 (BS80023172) securely to the gas valve and the appropriate earth point as per the manufacturer's diagrams.
5. Double-check all connections for tightness and correct placement.
6. Restore power and conduct a full operational check of the ducted heater, ensuring the gas valve functions correctly and safely.

Limitations & Safety Notes

• Installation should only be performed by a licensed gasfitter or qualified HVAC technician.
• Always ensure power is isolated before working on electrical components.
• Use only with compatible Brivis HCCA621 gas valves as specified.
• Follow all Australian standards and manufacturer's installation guidelines.

Tradie Pro Tip

When replacing wiring looms, give all terminal connections a good clean. A bit of fine sandpaper or a wire brush can prevent future resistance issues, especially in older units where corrosion can build up. It’s a small step that makes a big difference for reliability.

Pair With

Pair with other genuine Brivis heating spares like ignitors and control boards, or grab a reliable multimeter from our Testo range to diagnose any electrical issues.