Bonaire Evap Cooler Celdek Clip and Washer Kit x 6

This Bonaire Celdek Clip and Washer Kit is a genuine replacement part essential for keeping your evaporative cooler pads secure. It helps techs and competent DIYers maintain their Bonaire evaporative cooling systems with ease.

Having a few spare clips on hand makes swapping out worn pads much quicker, especially when you're up on a hot, dusty roof in the middle of summer.

Best For

• Evaporative cooler service and maintenance technicians
• HVAC apprentices learning evaporative cooler maintenance
• Competent DIY homeowners maintaining Bonaire evaporative coolers

Compatibility

This clip and washer kit is specifically designed for use with Bonaire evaporative cooler models that utilise Celdek style cooling pads. It's a genuine Bonaire part (PN 6050170SP) ensuring a direct fit.

If you're running a different model or brand, check fittings and specs before ordering.

Features

• Genuine Bonaire part for reliable fit and function.
• Ensures evaporative pads are securely held in place.
• Comes as a convenient pack of six clips and six washers.
• Durable construction suitable for typical evaporative cooler operating conditions.

What's in the Box

• 6 x Bonaire Evap Cooler Celdek Clips
• 6 x Bonaire Evap Cooler Celdek Washers

Using It on the Job

1. Always isolate the main power to the evaporative cooler at the switchboard before beginning any work.
2. Drain the cooler's water reservoir and carefully remove the outer panels to access the pads.
3. Note the location and orientation of existing clips. Remove any old or broken clips and washers while taking out the old pads.
4. Install new evaporative pads, using the new Bonaire clips and washers to secure them firmly in place. Ensure a snug fit to prevent movement.
5. Reinstall access panels, refill the water reservoir, and restore power. Test the cooler's operation.

Limitations & Safety Notes

• Only for use with Bonaire evaporative cooling units that require Celdek pad clips.
• Ensure power is isolated before performing any maintenance on electrical appliances.
• These clips are designed for pad retention only and should not be used for structural support.
• Always follow manufacturer's instructions and local Safe Work guidance.

Tradie Pro Tip

Always keep a few spare clips and washers on the truck. They're small, easy to drop down into the cooler cabinet, and having them on hand saves you a trip back to the workshop when you're halfway through a pad change.

Pair With

Consider pairing these clips with new evaporative cooler pads, a replacement Bonaire pump, or a float valve for comprehensive evaporative cooler maintenance.