These Testo standard measuring cables with angled plugs are designed for HVAC and electrical techs needing reliable connections for their multimeters and clamp meters. They provide a secure grip, making electrical parameter measurements simpler and safer on the job. Good leads are essential; trying to wrangle cheap, flimsy cables in a tight switchboard is a pain no one needs.
Whether you're checking control circuits, testing motor windings, or diagnosing power issues, these cables are built to handle daily use in Australian conditions.
Best For
- HVAC electricians and service technicians
- Refrigeration mechanics performing electrical diagnostics
- Apprentices learning electrical troubleshooting
- Competent DIY owners maintaining electrical components
Compatibility
These standard measuring cables are designed to connect seamlessly with Testo clamp meters and digital multimeters, including models like the Testo 760-1, 760-2, 760-3, and 770-1. Their universal 4 mm tip diameter also means they'll work with most other brands of multimeters on the market. If you're running a different model, check fittings and specs before ordering.
Features
- Angled Plug Design: Provides better strain relief and easier access in tight spots compared to straight plugs.
- Rubber-Coated Grips: Ensures a secure, non-slip hold, even with oily hands or in humid conditions.
- 4 mm Tip Diameter: Standard size (18 mm length) for broad compatibility with various electrical test points and terminals.
- CAT II 1000 V Rated: Suitable for measurements on general power circuits, appliances, and permanently installed equipment.
- Durable Construction: Built to withstand the rigours of daily trade use, resisting wear and tear.
Technical Specifications
| Parameter | Detail |
|---|---|
| Weight | 110 g (3.88 oz.) |
| Tip Diameter | 4 mm (0.157 in.) |
| Tip Length | 18 mm (0.709 in.) |
| Measuring Cable Length | 1,225 mm (1.225 m / 48.228 in.) |
| Overvoltage Category | CAT II 1000V |
| Product Colour | Black; Red |
What's in the Box
- 1 set of standard measuring cables (angled plug)
- Tip diameter: 4 mm
- Tip length: 18 mm
Using It on the Job
- Safety First: Always ensure the circuit you're testing is de-energised and locked out if working on mains power. Confirm your multimeter's function and range settings are correct before connecting.
- Connect to Meter: Insert the angled plugs firmly into the appropriate input jacks on your multimeter or clamp meter, observing correct polarity (usually black for common, red for voltage/resistance).
- Secure Grips: Use the rubber-coated grips to maintain a firm hold while making contact with test points. The angled plug helps manage cable routing.
- Measure Parameters: Carefully apply the 4 mm tips to the test points, ensuring good contact for accurate readings. Avoid touching bare metal parts of the tips during live measurements.
- Post-Use Care: Disconnect leads from the meter and coil them neatly to prevent kinks or damage. Store them in a tool bag away from sharp objects.
Limitations & Safety Notes
- These cables are rated for CAT II 1000V. Do not use them for measurements exceeding this category or voltage level.
- Always inspect cables for cuts, cracks, or exposed wiring before each use. Damaged leads can pose a severe electrical hazard.
- Follow Australian standards and Safe Work guidance for all electrical testing procedures.
- Ensure a current calibration on your measuring instrument for accurate and reliable results.
Tradie Pro Tip: Don't just chuck your leads in the bottom of your toolbox. Coil them properly after each job – it'll save you headaches with tangled wires and extend their lifespan, especially with these angled plugs.
Pair With
Pair these Testo measuring cables with a reliable Testo digital multimeter or a Testo clamp meter from our extensive range of electrical testing tools. Consider adding a set of safety crocodile clips for hands-free testing where appropriate.