These Brivis Advance Series filter pads are a direct replacement for your evaporative cooler, keeping your system running efficiently and air quality top-notch. Regular filter changes are key to avoiding dust build-up and keeping performance up, especially during those long Aussie summers.
Best For
- HVAC service techs performing routine evaporative cooler maintenance.
- Brivis Advance Series evaporative cooler owners maintaining their own units.
- Maintenance teams for commercial Brivis evaporative units.
Compatibility
These Brivis filter pads are designed to fit the following Brivis Advance Series evaporative cooler models:
- Brivis F86
- Brivis F86DS
If you're running a different model, check fittings and specs before ordering.
Features
- Direct OEM replacement for Brivis Advance Series coolers.
- Dimensions: 850mm x 787mm x 90mm for a precise fit.
- Supplied as a complete set of 4 pads for full system replacement.
- Designed to maintain optimal evaporative cooling efficiency and air filtration.
Technical Specifications
| Specification | Detail |
|---|---|
| Dimensions (each pad) | 850mm (L) x 787mm (W) x 90mm (H) |
| Suitability | Brivis Advance Series F86, F86DS |
| Quantity | Set of 4 pads |
| Brivis Part No. | 81062874 |
What's in the Box
- 4x Brivis Advance Series Filter Pads (850x787x90mm)
Using It on the Job
- Isolate power to the evaporative cooler at the mains and confirm lockout procedures.
- Carefully remove the old, saturated filter pads from the cooler sections.
- Clean out any debris, scale, or sediment from the cooler's water pan and distribution system.
- Install the new Brivis filter pads, ensuring they are seated correctly and firmly in their respective frames.
- Restore power and test the cooler operation, checking for proper water distribution over the new pads and efficient cooling.
- Advise the client on regular cleaning and replacement schedules to maintain system efficiency and air quality.
Limitations & Safety Notes
- These filter pads are only for compatible Brivis Advance Series models as specified (F86, F86DS).
- Always isolate electrical power to the unit before performing any maintenance or component replacement on an evaporative cooler.
- Wear appropriate PPE (gloves, eye protection, mask if dust is an issue) when handling used filter pads due to potential mould, dust, or biological growth.
- Regular inspection and cleaning of the cooler's water system (pan, pump, distribution lines) are essential for long-term performance, not just filter replacement.
Tradie Pro Tip
When you're swapping these out, give the water distribution tray and tank a good scrub. Prevents scale build-up and keeps fresh air flowing right, which helps the new pads last longer too.
Pair With
Pair with evaporative cooler cleaning solutions and a replacement float valve if yours is looking worn, to ensure your system runs clean and trouble-free through the hottest parts of the year.