Brivis Advance Series Filter Pads 850x787x90mm (Set of 4)

These Brivis Advance Series filter pads are a direct replacement for your evaporative cooler, keeping your system running efficiently and air quality top-notch. Regular filter changes are key to avoiding dust build-up and keeping performance up, especially during those long Aussie summers.

Best For

• HVAC service techs performing routine evaporative cooler maintenance.
• Brivis Advance Series evaporative cooler owners maintaining their own units.
• Maintenance teams for commercial Brivis evaporative units.

Compatibility

These Brivis filter pads are designed to fit the following Brivis Advance Series evaporative cooler models:

• Brivis F86
• Brivis F86DS

If you're running a different model, check fittings and specs before ordering.

Features

• Direct OEM replacement for Brivis Advance Series coolers.
• Dimensions: 850mm x 787mm x 90mm for a precise fit.
• Supplied as a complete set of 4 pads for full system replacement.
• Designed to maintain optimal evaporative cooling efficiency and air filtration.

Technical Specifications

What's in the Box

• 4x Brivis Advance Series Filter Pads (850x787x90mm)

Using It on the Job

1. Isolate power to the evaporative cooler at the mains and confirm lockout procedures.
2. Carefully remove the old, saturated filter pads from the cooler sections.
3. Clean out any debris, scale, or sediment from the cooler's water pan and distribution system.
4. Install the new Brivis filter pads, ensuring they are seated correctly and firmly in their respective frames.
5. Restore power and test the cooler operation, checking for proper water distribution over the new pads and efficient cooling.
6. Advise the client on regular cleaning and replacement schedules to maintain system efficiency and air quality.

Limitations & Safety Notes

• These filter pads are only for compatible Brivis Advance Series models as specified (F86, F86DS).
• Always isolate electrical power to the unit before performing any maintenance or component replacement on an evaporative cooler.
• Wear appropriate PPE (gloves, eye protection, mask if dust is an issue) when handling used filter pads due to potential mould, dust, or biological growth.
• Regular inspection and cleaning of the cooler's water system (pan, pump, distribution lines) are essential for long-term performance, not just filter replacement.

Tradie Pro Tip

When you're swapping these out, give the water distribution tray and tank a good scrub. Prevents scale build-up and keeps fresh air flowing right, which helps the new pads last longer too.

Pair With

Pair with evaporative cooler cleaning solutions and a replacement float valve if yours is looking worn, to ensure your system runs clean and trouble-free through the hottest parts of the year.