This Breezair Two Speed Icon Motor is a direct replacement part designed to get your evaporative cooler back up and running efficiently. It's a critical component for maintaining good airflow and consistent cooling through those long Australian summers.
Anyone who's battled a failing evaporative motor knows the value of a reliable replacement; it's about keeping the air moving when it really counts, especially during peak season breakdowns.
Best For
- Replacing failed or worn-out motors in Breezair evaporative cooling units.
- HVAC service technicians and maintenance teams.
- Competent DIY owners undertaking evaporative cooler repairs.
Compatibility
This motor is specifically designed to suit Breezair evaporative cooling units. It operates at 1100 Watts and offers two-speed functionality, matching the original equipment specifications for many Breezair models. It's listed with Seeley Part Number 095080.
If you're running a different model, check fittings and specs before ordering.
Features
- Genuine Replacement: Designed by Breezair/Seeley for optimal fit and performance in compatible units.
- Two-Speed Operation: Allows for flexible airflow control to suit varying cooling demands.
- 1100 Watt Power: Delivers robust power for reliable and effective evaporative cooling.
- Icon Motor Series: Part of the Breezair Icon range, ensuring specific design and electrical characteristics.
Technical Specifications
| Specification | Detail |
|---|---|
| Power Rating | 1100 Watts |
| Speed | Two Speed |
| Manufacturer Part No. | Seeley PN 095080 |
What's in the Box
- 1 x Breezair Two Speed Icon Motor 1100W (SY095080)
Using It on the Job
- Isolate Power: Always switch off the main power to the evaporative cooler at the circuit breaker and use lockout/tagout procedures before commencing any work.
- Access Motor: Remove the unit's covers and any internal components necessary to safely access the old motor. You'll likely need to drain the water reservoir.
- Disconnect & Document: Carefully disconnect the existing wiring, noting or taking photos of the connections (especially for two-speed motors). Disconnect the fan blade and remove the old motor.
- Install New Motor: Mount the new Breezair Icon motor securely in position and attach the fan blade, ensuring it's balanced and spins freely.
- Reconnect & Test: Re-wire the new motor according to your documentation. Once everything is connected and covers are back on, restore power and test both speeds of the motor operation.
Limitations & Safety Notes
- This motor is designed for Breezair evaporative cooler units only; check your model's specifications for compatibility.
- Electrical work should always be performed by a qualified person following local Australian electrical safety standards.
- Always ensure power is completely isolated and locked out before attempting installation or repair.
- Ensure proper earthing and secure wiring connections to prevent hazards.
Tradie Pro Tip: When replacing an evaporative cooler motor, always inspect the fan blade for damage or excessive dust build-up. A well-balanced and clean fan blade is crucial for motor longevity and efficient airflow.
Pair With
Consider pairing this motor with a new evaporative cooler capacitor, replacement filter pads, or a Breezair wall controller for a complete service.