Breezair Two Speed Icon Motor 1100W

This Breezair Two Speed Icon Motor is a direct replacement part designed to get your evaporative cooler back up and running efficiently. It's a critical component for maintaining good airflow and consistent cooling through those long Australian summers.

Anyone who's battled a failing evaporative motor knows the value of a reliable replacement; it's about keeping the air moving when it really counts, especially during peak season breakdowns.

Best For

• Replacing failed or worn-out motors in Breezair evaporative cooling units.
• HVAC service technicians and maintenance teams.
• Competent DIY owners undertaking evaporative cooler repairs.

Compatibility

This motor is specifically designed to suit Breezair evaporative cooling units. It operates at 1100 Watts and offers two-speed functionality, matching the original equipment specifications for many Breezair models. It's listed with Seeley Part Number 095080.

If you're running a different model, check fittings and specs before ordering.

Features

• Genuine Replacement: Designed by Breezair/Seeley for optimal fit and performance in compatible units.
• Two-Speed Operation: Allows for flexible airflow control to suit varying cooling demands.
• 1100 Watt Power: Delivers robust power for reliable and effective evaporative cooling.
• Icon Motor Series: Part of the Breezair Icon range, ensuring specific design and electrical characteristics.

Technical Specifications

What's in the Box

• 1 x Breezair Two Speed Icon Motor 1100W (SY095080)

Using It on the Job

1. Isolate Power: Always switch off the main power to the evaporative cooler at the circuit breaker and use lockout/tagout procedures before commencing any work.
2. Access Motor: Remove the unit's covers and any internal components necessary to safely access the old motor. You'll likely need to drain the water reservoir.
3. Disconnect & Document: Carefully disconnect the existing wiring, noting or taking photos of the connections (especially for two-speed motors). Disconnect the fan blade and remove the old motor.
4. Install New Motor: Mount the new Breezair Icon motor securely in position and attach the fan blade, ensuring it's balanced and spins freely.
5. Reconnect & Test: Re-wire the new motor according to your documentation. Once everything is connected and covers are back on, restore power and test both speeds of the motor operation.

Limitations & Safety Notes

• This motor is designed for Breezair evaporative cooler units only; check your model's specifications for compatibility.
• Electrical work should always be performed by a qualified person following local Australian electrical safety standards.
• Always ensure power is completely isolated and locked out before attempting installation or repair.
• Ensure proper earthing and secure wiring connections to prevent hazards.

Tradie Pro Tip: When replacing an evaporative cooler motor, always inspect the fan blade for damage or excessive dust build-up. A well-balanced and clean fan blade is crucial for motor longevity and efficient airflow.

Pair With

Consider pairing this motor with a new evaporative cooler capacitor, replacement filter pads, or a Breezair wall controller for a complete service.