Testo Spare Sintered Filters (2 pieces)

These Testo spare sintered filters are essential for any tech regularly performing flue gas analysis, ensuring your probe stays clean and accurate. In dusty Australian conditions, a clean filter stops soot and debris from clogging up your analyser, saving you headaches on a call-out.

I've seen probes foul up fast without good filtration, leading to unreliable readings and extra calibration work. Keep these on the truck; they're vital for proper combustion testing.

Best For

• HVAC technicians
• Gas fitters
• Commissioning teams
• Service and maintenance crews

Compatibility

These sintered filters are compatible with standard Testo flue gas probes designed to accept a 14.5mm or 14mm diameter filter. Double-check your specific probe's filter requirements before installing these. If you're running a different model, check fittings and specs before ordering.

Features

• Effective Filtration: Protects your flue gas probe from soot, dust, and particulate matter found in combustion gases.
• Optimised for Flue Gas: Specifically designed to handle the conditions encountered during routine combustion analysis.
• Easy Replacement: Simple swap-out process gets you back to testing quickly, minimising downtime on the job.
• Cost-Effective Maintenance: Extends the service life and maintains the accuracy of your expensive flue gas probe.
• Durable Construction: Made with sintered steel for reliable performance in demanding field conditions.

Technical Specifications

What's in the Box

• 2 x Testo Spare Sintered Filters (14 mm diameter, 30 mm length)

Using It on the Job

1. Always isolate power to the appliance and ensure safe working conditions before beginning any work.
2. Carefully remove the existing filter from your standard flue gas probe, following the manufacturer's guide.
3. Inspect the probe for any signs of damage or debris build-up. Clean the probe tip thoroughly if necessary.
4. Insert one new sintered filter, ensuring it sits securely and snugly within the probe's filter housing.
5. Perform a zeroing or calibration check on your flue gas analyser as per the instrument's instructions before taking measurements.
6. Keep the remaining spare filter protected in its original packaging until it's needed next.

Limitations & Safety Notes

• These filters are only for use with compatible standard flue gas probes requiring a 14.5mm or 14mm diameter filter.
• Not suitable for probes with a preliminary filter already built-in, or for non-standard applications.
• Always refer to your Testo flue gas analyser and probe manuals for specific maintenance and operating procedures.
• Ensure filters are changed regularly to maintain analyser accuracy and prevent internal sensor damage.

Tradie Pro Tip

Always keep a spare pack of these on your service vehicle. Nothing worse than needing to run an urgent combustion test, finding a fouled filter, and not having a replacement handy. It's cheap insurance against lost time.

Pair With

Pair with a Testo flue gas analyser and a range of appropriate Testo flue gas probes for complete combustion analysis and efficient troubleshooting.