Testo pH3 Replacement Probe for 206, Type 14

This Testo 0650 2064 pH3 replacement probe is the exact fit for your Testo 206 pH3 meter, helping you keep your water quality checks accurate and reliable on site. Regular maintenance, including replacing worn probes, is key to trustworthy readings, especially when you're dealing with critical systems like cooling towers or boiler feedwater where pH swings can cause real headaches. I've seen enough corroded pipes and fouled coils to know that getting your pH right matters.

Best for: HVAC and refrigeration techs, water treatment specialists, and facility maintenance teams using a Testo 206 pH3 meter for water quality monitoring in various applications.

Compatibility

This replacement probe is specifically designed for use with the Testo 206 pH3 meter. If you're running a different model, check fittings and specs before ordering.

Features

• Genuine Testo Part: Ensures full compatibility and maintained accuracy with your Testo 206 pH3 meter.
• Direct Replacement: Designed to seamlessly replace your existing pH3 probe, minimising downtime.
• Reliable Readings: Helps maintain the accuracy of your pH measurements for consistent monitoring.

What's in the Box

• One Testo 0650 2064 pH3 Replacement Probe for 206, Type 14

Using It on the Job

1. Isolate Power: Ensure your Testo 206 pH3 meter is powered off before handling the probe.
2. Remove Old Probe: Carefully unscrew or unclip the existing pH probe from the meter.
3. Install New Probe: Securely attach the new 0650 2064 probe, ensuring a snug fit.
4. Calibrate: Power on your meter and perform a full calibration using appropriate pH buffer solutions as per your Testo 206 pH3 user manual. This is crucial for accurate readings.
5. Check Readings: Take a test reading in a known solution to confirm proper function.

Limitations & Safety Notes

• This probe is only compatible with the Testo 206 pH3 meter. It will not work with other Testo models or third-party devices.
• Always calibrate your meter with the new probe before taking critical measurements to ensure accuracy.
• Handle the glass bulb of the probe with care to prevent damage.
• Store the probe correctly in a protective cap with appropriate storage solution to prolong its lifespan.

Tradie Pro Tip

Don't skip the calibration with fresh buffer solutions when you swap out a pH probe. It's the only way to trust your readings, and using old buffer is just asking for trouble down the track. Always store your probe wet.

Pair With

Pair with genuine Testo pH calibration solutions and a Testo 206 pH3 meter for complete water quality testing.