Testo Industrial Probe Pre-Filter for Flue Gas

This Testo industrial probe pre-filter is your essential defence against dust and particulates when measuring flue gas. It keeps your probe shaft and sampling hose clear, preventing costly blockages and damage, especially when you're working in harsh industrial environments or tackling emissions on older plant equipment. Keeping your sampling line clear means you get reliable readings the first time, every time, without having to pull the system apart to clear a blockage.

Best For

• Industrial plant commissioning and maintenance
• Emissions monitoring and compliance checks
• Furnace atmosphere analysis
• Checking flue gas cleaning systems

Compatibility

This preliminary filter is designed as an accessory for the Testo industrial probe set 1200 °C (part number 0600 7610) and the Testo heated industrial probe set (part number 0600 7630). If you're running a different model, check fittings and specs before ordering to ensure it's the right fit for your setup.

Features

• Clog Prevention: Effectively stops dust and particles from blocking your probe shaft and sampling hose.
• High-Temperature Rating: Built to withstand operating temperatures up to 1000 °C, suitable for demanding industrial applications.
• Fine Filtration: Provides a 10 µm filtration grade, ensuring only clean gas reaches your analyser.
• Robust Construction: Housing made from silicon carbide, stainless steel, and steel for durability in harsh environments.
• Extended Probe Life: Protects sensitive components from abrasive dust, reducing wear and tear.

Technical Specifications

What's in the Box

• 1 x Testo Industrial Probe Pre-Filter

Using It on the Job

1. Ensure your Testo industrial probe is clean and ready for attachment.
2. Securely thread the pre-filter onto the probe shaft as per manufacturer guidelines.
3. Connect your probe assembly and sampling hose to your flue gas analyser, ensuring all connections are tight.
4. Perform a pre-test check to ensure no leaks and proper gas flow through the filtered system.
5. Carefully insert the probe into the flue gas stack, observing all relevant safety procedures for working with high temperatures and industrial emissions.
6. After measurements, remove the probe and visually inspect the pre-filter for dust accumulation. Clean or replace as needed to maintain filtration efficiency and protect your gear.

Limitations & Safety Notes

• This filter is only for use with compatible Testo industrial probes as listed above.
• Always wear appropriate Personal Protective Equipment (PPE) when working with hot flue gas and in industrial environments.
• Not suitable for highly corrosive or aggressive gas compositions that could damage the housing materials beyond typical flue gas conditions.
• Follow all manufacturer instructions for installation, operation, and maintenance of the filter and connected equipment.
• Adhere to all Australian safety standards and Safe Work guidance for industrial plant measurements.

Tradie Pro Tip

When you're dealing with really dusty stacks, like older coal boilers or some industrial dryers, always double-check this filter before and after your measurement run. A quick visual inspection can save you hours of downtime trying to clear a blocked sampling line in the field.

Pair With

Pair with Testo industrial probe sets and flue gas analysers for a complete emissions testing setup, or explore our range of calibration gases to keep your instruments sharp.