Testo Industrial Flue Gas Probe Kit 1200°C

This Testo Industrial Flue Gas Probe Kit is built tough for Aussie industrial environments, letting you safely sample exhaust gases up to 1200°C for accurate emissions analysis. It’s an essential bit of kit for anyone running a Testo 340 or 350 analyser in challenging high-temperature applications.

From measuring furnace atmospheres to checking plant efficiency, this probe kit ensures you get reliable data without putting yourself in harm's way. I've seen probes buckle under sustained high heat, but this unit is designed to hold up to the serious temperatures found in industrial flues.

Best For

• Industrial emissions technicians and environmental monitoring teams.
• HVAC commissioning specialists working on large industrial plants.
• Plant maintenance crews monitoring furnace efficiency.

Compatibility

This industrial probe kit is specifically designed to integrate seamlessly with your Testo 340 and Testo 350 Emission Analyzers. It’s perfect for extractive sampling of flue gas in industrial setups with high flue gas temperatures of up to 1200°C and large pipe diameters. If you're running a different model, check fittings and specs before ordering.

Features

• High-Temperature Rating: Handles flue gas temperatures up to a scorching 1200°C (2192°F) without issues.
• Robust Construction: Features a durable metal housing and steel handle for industrial longevity.
• Integrated Filtration: Comes with a 4-metre gas sampling hose including an inline filter to protect your analyser from contaminants.
• Type K Thermocouple: Includes a reliable Type K thermocouple for accurate temperature measurements.
• Extendable Design: The 1-metre sampling tube can be extended up to 3 metres using optional extension tubes for deeper access into large flues.

Technical Specifications

What's in the Box

• Industrial probe handle (steel)
• 1 metre (39 inch) unheated probe shaft for 1200 °C flue gas
• 4 metre (13 foot) gas sampling hose with inline filter
• Thermocouple type K

Using It on the Job

1. Before entering any industrial flue or high-temperature area, ensure all necessary permits are in place and appropriate PPE is worn.
2. Connect the gas sampling hose to your Testo 340 or 350 analyser, ensuring the inline filter is correctly installed and free from blockages.
3. Insert the probe shaft into the flue. For deeper penetration, attach optional extension tubes and thermocouple type K accessory as needed.
4. Perform your emissions measurements or temperature readings according to the analyser's instructions and plant protocols.
5. After use, allow the probe to cool. Clean any particulate buildup from the probe shaft and check the inline filter for contamination. Replace filters as required.

Limitations & Safety Notes

• This probe is rated for flue gas temperatures up to 1200 °C. Do not exceed this limit.
• Only use this probe kit with compatible Testo 340 or Testo 350 Emission Analyzers.
• Always follow site-specific safety procedures and Australian Standards for working in high-temperature or hazardous environments.
• Ensure the gas sampling hose is free from kinks or damage that could affect sample integrity or analyser performance.

Tradie Pro Tip

When you're dealing with high dust loads in a flue, seriously consider grabbing the optional preliminary filter. It'll save your analyser's internal filters and sampling lines a heap of abuse, extending the life of your expensive gear and reducing maintenance downtime.

Pair With

Pair this industrial probe kit with a Testo 340 or Testo 350 Emissions Analyser and spare particle filters to ensure you're always ready for reliable emissions monitoring. Consider adding an optional probe extension tube for those really deep flues.