Testo Databus Connection Cable with Bayonet Fitting, 20m

This Testo databus connection cable is a critical piece of gear for anyone running a Testo 350 emission analyser system. It reliably links your control unit to the analyser box, or connects multiple analyser boxes together, ensuring your data flows without a hitch.

Having a solid, reliable connection cable like this 20-metre Testo unit means you're not stuck trying to stretch short leads or troubleshoot flaky connections on a busy rooftop or in a tight plant room.

Best For

• HVAC/R technicians performing emission analysis with Testo 350 systems.
• Industrial service teams using Testo databus equipment.
• Anyone needing a reliable, long-reach data connection for Testo analysers.

Compatibility

This connection cable is designed specifically for the Testo databus system, connecting your Testo Control Unit to an analyser box, or linking multiple analyser boxes. It's built to work seamlessly with equipment like the Testo 350 portable emission analyser. If you're running a different model, check fittings and specs before ordering.

Features

• Secure Bayonet Fitting: Provides a quick, positive lock to prevent accidental disconnections during critical measurements.
• Generous 20m Length: Offers ample reach for complex setups or when analyser units need to be positioned far from the control unit.
• Durable Plastic Housing: Designed to withstand typical job site conditions and offer good protection for the internal wiring.
• Databus Interface: Ensures correct data communication between Testo system components.

Technical Specifications

What's in the Box

• 1 x Testo Connection Cable with Bayonet Fitting (20 m)

Using It on the Job

1. Inspect Cable: Before each use, visually check the cable for any signs of damage, cuts, or worn insulation. A damaged cable can compromise data or lead to unit issues.
2. Connect Securely: Align the bayonet fitting carefully and twist to ensure a firm, locked connection to your Testo control unit and analyser box.
3. Route Safely: Lay out the 20m cable to avoid tripping hazards, sharp edges, or areas where it could be crushed or pinched by equipment.
4. Power On: Once all connections are secure, power on your Testo analyser system and verify communication.
5. Clean and Store: After use, wipe down the cable to remove any dirt or dust. Coil it neatly for storage to prevent kinks and prolong its lifespan.

Limitations & Safety Notes

• Only use this cable with compatible Testo databus systems, as specified by the manufacturer.
• Avoid kinking, crushing, or exposing the cable to extreme temperatures or chemicals that could degrade the plastic housing.
• Ensure the bayonet fitting is fully engaged to maintain a reliable data connection and prevent wear.
• While robust, this cable is for data transfer. Do not use it as a substitute for power cables or in high-voltage applications.

Tradie Pro Tip

When you're out in the field, a clean, properly coiled cable is a happy cable. Don't just chuck it in the bottom of your toolbox; a little bit of care will save you a headache and potential replacement costs down the track.

Pair With

Pair this 20m databus cable with your Testo 350 Portable Emission Analyser and other Testo analyser accessories for a complete diagnostic setup. It's essential for extending your reach on larger commercial and industrial jobs.