Testo Databus Connection Cable 2m

This 2-metre connection cable is designed specifically for Testo 350 series emissions analysers, ensuring reliable data transfer between your Control Unit and analyzer box. It's a critical link for techs performing combustion analysis, especially when the main unit needs to stay cool while the analyzer box is closer to the stack or burner. Having a spare cable on the truck means you're not held up on a job if the original gets pinched or damaged on-site.

Best For

• HVAC service technicians
• Combustion analysis specialists
• Boiler and burner maintenance teams
• Engine tuning and compliance testers

Compatibility

This cable is built for the Testo databus system, primarily used with the Testo 350 series portable emission analysers. This includes the Control Unit, individual analyzer boxes, and linking multiple analyzer boxes. If you're running a different model, check fittings and specs before ordering.

Features

• Bayonet Connection: Provides a secure, quick-connect interface that locks into place, preventing accidental disconnections during critical measurements.
• 2 Metre Length: Offers ample reach for most job sites, allowing flexibility in positioning your Testo 350 components, especially in tight plant rooms or on elevated platforms.
• Durable Construction: Housed in robust plastic with a black finish, designed to withstand the typical knocks and scrapes of daily field use.
• Data Bus Interface: Specifically engineered for the Testo databus, ensuring high-integrity data communication between your analyser components.

Technical Specifications

What's in the Box

• 1 x Testo Databus Connection Cable with bayonet fitting, 2 m length

Using It on the Job

1. Inspect Connections: Before each use, visually check the bayonet fittings and cable for any signs of damage or wear.
2. Connect Securely: Align the bayonet fitting on the cable with the port on your Testo 350 Control Unit or analyzer box, push in, and twist until it locks.
3. Route Safely: Run the cable away from hot surfaces, moving parts, or areas where it could be tripped over or pinched.
4. Verify Communication: Once connected and powered on, confirm that your Testo 350 system recognises all connected components before starting your measurements.
5. Post-Use Care: Disconnect by twisting and pulling gently. Coil the cable neatly for storage to prevent kinks or damage.

Limitations & Safety Notes

• Only for use with compatible Testo databus systems, specifically the Testo 350 series analysers.
• Avoid excessive bending or pulling on the cable, especially near the connectors, to prevent internal wire damage.
• Do not attempt to repair damaged cables; replacement is recommended for safety and reliable operation.
• Keep connectors clean and free of dirt or debris to ensure proper electrical contact.

Tradie Pro Tip

Always carry a spare databus cable, especially when you're out on a critical compliance test. It's a small part, but a damaged cable can shut down your entire analyser, costing you time and a re-visit.

Pair With

Pair this connection cable with any Testo 350 emissions analyser, such as the Testo 350 Control Unit or various Testo 350 Analyzer Boxes. It's an essential accessory for your Testo Combustion Analyser Kit.