Seeley Control Box Conversion CPMD TBA/CPL/LCB

This Seeley Control Box Conversion (SY107738) is your go-to replacement for a faulty control unit in specific Braemar and Coolair evaporative coolers. It ensures your system runs reliably, especially when the Aussie heat kicks in and you need that cooler working right.

Anyone who's battled a failing evaporative cooler in the middle of an Aussie summer knows the importance of a reliable control box. This unit helps get your system back up and running smoothly without hassle.

Best For

• HVAC service technicians maintaining evaporative cooling systems.
• Evaporative cooler installation and repair teams.
• Competent DIY owners replacing components on their own units.

Compatibility

This conversion control box is designed to replace the original CPMD control box in specific Braemar and Coolair evaporative cooler models. It directly suits units identified by the TBA, CPL, and LCB codes.

If you're running a different model, check fittings and specs before ordering.

Features

• Direct replacement for existing Braemar/Coolair CPMD control boxes.
• Specifically designed for TBA, CPL, and LCB series evaporative cooler units.
• Genuine Seeley part (PN 107738), ensuring compatibility and expected lifespan.
• A crucial component for restoring full functionality to your evaporative cooler.

What's in the Box

• 1 x Seeley Control Box Conversion CPMD TBA/CPL/LCB (Part/Code: SY107738)

Using It on the Job

1. Always isolate power to the evaporative cooler at the main switchboard and apply lockout/tagout procedures.
2. Access the existing control box, typically located within the cooler unit.
3. Carefully disconnect all wiring from the old control box, noting terminal positions or taking photos for reference.
4. Mount the new Seeley Control Box Conversion (SY107738) securely in place.
5. Reconnect all wiring to the new control box, ensuring correct terminal connections and proper torque.
6. Restore power to the unit and test all functions of the evaporative cooler, including fan speeds and water pump operation.

Limitations & Safety Notes

• This component involves electrical connections; ensure power is isolated before working on the unit.
• Installation should be carried out by a qualified technician or competent person following all local electrical regulations.
• Only compatible with the specified Braemar/Coolair CPMD TBA/CPL/LCB units. Do not attempt to use on other models.
• Always follow the evaporative cooler manufacturer's specific installation and safety guidelines.

Tradie Pro Tip: Before disconnecting anything, take a clear photo of the existing wiring. It's a lifesaver for making sure everything goes back exactly where it should on the new box, saving you troubleshooting time later.

Pair With

Pair with new evaporative cooler wall controllers and a replacement water pump for a full evaporative cooler overhaul. Check out our range of evaporative cooler spares for other essential components.