Seeley 24V Drain Valve for Evaporative Coolers

This Seeley 24V Drain Valve (PN 105345) is the genuine replacement part you need to keep your evaporative cooler running efficiently. A properly functioning drain valve is essential for flushing out mineral deposits and maintaining water quality, preventing buildup that can shorten the life of your pads and pump.

Anyone who’s worked on evaporative coolers knows how crucial a reliable drain valve is, especially in a scorching Aussie summer. Don't let a stuck or faulty valve compromise your system's performance.

Best For

• Replacing faulty or worn-out drain valves in compatible evaporative coolers.
• Routine maintenance and repair for Breezair, Braemar, and Coolair models.

Compatibility

This 24V drain valve is designed to suit a range of evaporative cooler models from Seeley brands. Always double-check your existing valve and cooler model against this list to ensure a correct fit.

• Breezair: EXQ, EZQ, EXS, EXD, EZD, EXH, EZH, ES, EV, EX, EZ
• Braemar: BMQ, LCQ, LCS, LCB, BM
• Coolair: CVP, CPL, CPS, CPQ

If you're running a different model, check fittings and specs before ordering.

Features

• Genuine Seeley Part: Ensures compatibility and reliability with specified models.
• 24V Operation: Designed for standard evaporative cooler control circuits.
• Essential for Water Management: Facilitates proper draining to reduce scale buildup and maintain cooling efficiency.

Technical Specifications

What's in the Box

• 1 x Seeley 24V Drain Valve (PN 105345)

Using It on the Job

1. Power Isolation: Always isolate power to the evaporative cooler at the mains before beginning any work. Use lockout/tagout procedures if available.
2. Drain Water: Ensure the cooler's water reservoir is empty before removing the old valve to avoid spillage.
3. Remove Old Valve: Carefully disconnect the electrical wiring and plumbing connections from the existing drain valve. Note wiring colours or take a photo if unsure.
4. Install New Valve: Connect the new Seeley drain valve, ensuring all electrical connections are secure and plumbing is leak-free. Follow the manufacturer's specific installation instructions for your cooler model.
5. Test Operation: Restore power and test the cooler's drain cycle to confirm the new valve is opening and closing correctly, and there are no leaks.

Limitations & Safety Notes

• This valve is for 24V electrical systems only. Do not attempt to use it with higher voltage circuits.
• Always isolate power before undertaking any electrical or plumbing work on the unit.
• Only use this drain valve with the specific Breezair, Braemar, and Coolair models listed in the compatibility section.
• Follow all Australian standards and Safe Work guidance for electrical and plumbing repairs.

Tradie Pro Tip

Before you swap out the old valve, it’s worth checking the wiring for continuity and the valve's coil for resistance. Sometimes a faulty connection or a problem with the control board can mimic a bad valve, saving you a bit of work if it's not the valve itself.

Pair With

Consider pairing this drain valve with new evaporative cooler filter pads or a replacement float valve to give your system a complete refresh. Also check out other evaporative cooler pumps and spare parts for your specific model.