FILCEL Evaporative Cooler Pads for Breezair - Set of 7

This is a genuine set of seven FILCEL cellulose evaporative cooler pads for Breezair units, designed to keep your cooler running efficiently and the air fresh. Essential for maintaining your evaporative cooler's performance in Australian conditions, ensuring you get cool, clean air when you need it most.

Anyone who's tackled a summer heatwave knows a choked evaporative cooler isn't worth much, so keeping these pads fresh makes a big difference to airflow and cooling efficiency.

Best For

• Replacing worn-out pads in compatible Breezair evaporative coolers.
• HVAC service technicians performing routine maintenance.
• Competent DIY homeowners maintaining their own evaporative cooling systems.

Compatibility

This set of FILCEL pads is designed to suit the following Breezair evaporative cooler models:

• EV130, EV160
• EZ130, EZ160
• EZD155, EZD175
• EZQ155, EZQ175
• EZH175

If you're running a different model, check fittings and specs before ordering.

Features

• Australian Made: Genuine FILCEL cellulose pads manufactured locally from high-quality paper and resins.
• Antibacterial Treatment: Pads are pre-treated, and a bonus tank treatment is included, helping to kill 99% of airborne germs, viruses, bacteria, mould, fungus, and spores.
• Safe for Environment: Antibacterial treatments are 100% safe for people, animals, and the environment.
• Fast Wetting: Designed for rapid saturation, ensuring quick and effective cooling.
• Durable & Self-Supporting: Built to last, maintaining their structure over time.

What's in the Box

• 7 x FILCEL Cellulose Evaporative Cooler Pads
• 1 x Bonus Antibacterial Tank Treatment

Using It on the Job

1. Isolate Power: Always switch off and lock out the evaporative cooler at the mains power before beginning any maintenance.
2. Remove Old Pads: Carefully unclip and remove the old, worn-out pads. Inspect their condition to gauge how frequently future replacements might be needed.
3. Clean Cooler Interior: Use this opportunity to clean the cooler's internal surfaces, sump, and water distribution system to remove scale, algae, or mould build-up.
4. Install New Pads: Insert the new FILCEL pads, ensuring they sit correctly within their frames for proper water distribution and airflow.
5. Apply Treatment: Add the bonus antibacterial tank treatment directly to the cooler's water reservoir according to instructions.
6. Test Operation: Restore power and run the cooler through its cycles to ensure correct wetting and airflow with the new pads.

Limitations & Safety Notes

• These pads are specifically for the listed Breezair evaporative cooler models. They may not fit other brands or models.
• Always ensure the cooler's power is isolated and locked out before attempting pad replacement or any maintenance.
• Follow the manufacturer's specific instructions for your Breezair model regarding pad installation and general maintenance.
• Store antibacterial treatments safely, out of reach of children and pets.

Tradie Pro Tip: Don't just swap the pads and call it a day. Take the extra time to clean out the sump and water distribution system while you're in there. It prevents future blockages, extends the life of your new pads, and keeps your cooler working its best.

Pair With

Pair with evaporative cooler cleaning agents and a good quality brush for a thorough seasonal service. Consider replacement evaporative cooler pumps if yours is showing signs of wear.