Element POE 32 - 68 Premium Refrigerant Oil 1L to 4L

Element polyol ester (POE) oils are made for modern HFC/HFO systems and tough Aussie conditions. Pick POE32 for standard A/C work or POE68 for low-temp racks and freezers. Less wear, smoother starts, fewer call-backs — no dramas.

Key Features & Trade Benefits

• HFC/HFO compatible (e.g., R134a, R404A, R407C, R410A) — proven miscibility for stable oil return and bloody good reliability in common installs.
• ISO Viscosity Grades 32 & 68 — match the OEM spec for scroll, rotary, hermetic or semi-hermetic compressors to protect bearings and valves.
• High thermal & chemical stability — resists breakdown under hot roof spaces and heavy cycles, cutting varnish build-up.
• Low pour / strong film strength — dependable lubrication at cold starts and under high load so systems pull down clean.
• Moisture management — formulated to minimise hydrolysis; correct handling reduces acid formation and keeps windings safer.
• Service-friendly pack sizes — 1L for top-ups, 4L for overhauls and multi-unit jobs.

Why This Product Matters

Wrong oil grade or tired oil can wreck a can fast. On a sweltering Perth arvo, a tech swapped out a cooked blend for fresh POE68 on a low-temp cabinet — pressures steadied, amps dropped, and the owner stopped chasing “mystery” icing. Fair dinkum, the right oil pays for itself in avoided call-backs.

Need other lubricant options? See our Refrigerant & HVAC Oils for alternative grades and brands.

Pro Tip

• Match the OEM: Always confirm the compressor’s ISO VG requirement (32 or 68). Don’t guess — check the data plate or manual.
• Keep POE sealed: POE is hygroscopic. Use sealed containers, cap lines, and purge with dry nitrogen during long opens.
• Don’t mix oil types: Avoid mixing POE with mineral/PAG unless the manufacturer explicitly allows it.
• Record the charge: Log oil type, volume, and date on the panel so the next tech can move faster.

Compatibility & System Info

Suitable for systems using R134a, R404A, R407C, R410A and other specified HFC/HFO blends. For A2L/HFOs (e.g., R1234yf) or R32 splits, follow the compressor OEM oil spec — some models require specific POE formulations.

Local jobsites: From humid Sydney plantrooms to hot Brisbane rooftops, Element POE maintains film strength and stability so systems pull down and hold temp without fuss.

What’s Included

• 1 × Element POE32 (1L) or POE32 (4L)
• 1 × Element POE68 (1L) or POE68 (4L)
• Optional variant on the same page: POE68 Spray Lubricant (300g) and Vac Pump Oil (4L)

Specifications

Warranty & Returns

Backed by the manufacturer’s warranty. For return windows and terms, see our Shipping & Returns. Keep containers sealed and unused for change-of-mind eligibility.

FAQs

POE32 vs POE68 — which should I use?
POE32 is common for standard A/C and mid-temp. POE68 is typical for low-temp refrigeration. Always match the compressor’s ISO grade.

Can I top up with POE if I don’t know the existing oil?
Don’t mix unknown oils. Recover, flush where required, and refill with the correct, OEM-specified POE grade.

Is POE suitable for R410A splits?
Yes — most R410A equipment specifies POE. Confirm grade in the service manual.

How do I reduce moisture issues with POE?
Keep containers closed, use new driers, and pull a deep vacuum. Swap vacuum pump oil regularly.

Related Products

• Fieldpiece High Grade Vacuum Pump Oil — helpful when you want consistent deep vacuums and clean oil windows.
• Imperial Charge-Oil Pump — a neat way to meter POE into systems without mess.
• Errecom POE32 (ISO VG32) — an alternative brand if you’re standardising across a fleet.

Compliance & Good Practice

For Australia’s refrigerant guidance and HFC phase-down context, see the Australian Government HFC phase-down FAQs. Follow site WHS procedures when handling oils and hazardous chemicals.