Coolbreeze Magnetic Float (Ball Only)

This is the Coolbreeze Magnetic Float (Ball Float Only), a genuine spare that's critical for your evaporative cooler. It's the small but crucial component that ensures your cooler's water level stays spot-on, preventing dry-outs or overfilling. It's a common component to wear out, especially after a few scorching Australian summers.

I've seen plenty of coolers on roofs that just needed a fresh float to get back in business. Getting the right part, like this CBSP2200, makes a job go smoothly.

Best For

• Evaporative cooler service technicians
• HVAC maintenance crews
• Competent DIY owners maintaining their Coolbreeze evaporative cooler

Compatibility

This magnetic float is specifically designed for Coolbreeze evaporative coolers equipped with a magnetic style float switch. It suits the following models:

• CoolBreeze Heritage: D095, D125, D160, D195, D230, D255
• CoolBreeze Cascade: C125, C160, C205, C240

If you're running a different model, check fittings and specs before ordering.

Features

• Direct Replacement: A genuine Coolbreeze spare part (PN: SP2200), ensuring a precise fit and reliable operation.
• Magnetic Operation: Designed to work seamlessly with Coolbreeze magnetic style float switches.
• Water Level Control: Crucial for maintaining correct water levels in your evaporative cooler reservoir, preventing damage from dry-out or overfilling.
• Easy to Install: Simple component swap for quick maintenance or repair jobs.

What's in the Box

• 1 x Coolbreeze Magnetic Float (Ball Float Only) - Part/Code: CBSP2200

Using It on the Job

1. Isolate Power: Always disconnect power to the evaporative cooler at the mains before starting any work to ensure safety.
2. Drain Water: Ensure the cooler's reservoir is drained to a safe working level or completely emptied.
3. Remove Old Float: Carefully unclip or remove the old magnetic float from its housing. Inspect the housing for any debris or scale build-up and clean as necessary.
4. Install New Float: Seat the new CBSP2200 float into position, ensuring it moves freely within the float switch mechanism.
5. Test Operation: Refill the cooler's reservoir and restore power. Observe the water level and float switch operation to confirm it's working correctly and that there are no leaks.

Limitations & Safety Notes

• Only suitable for the specified Coolbreeze Heritage and Cascade models with magnetic float switches.
• Always isolate power before attempting any maintenance or repairs on evaporative cooling units.
• Installation should be performed by a competent person familiar with evaporative cooler systems and safety procedures.
• Not intended for use with other brands or float switch types that do not use a magnetic ball float.

Tradie Pro Tip

Before you swap this float, always check for any gunk or scale build-up in the float switch housing itself. Sometimes a good clean is all that's needed, but if the old float is brittle, discoloured, or waterlogged, it's definitely time for a new one like the CBSP2200 to prevent future call-outs.

Pair With

This Coolbreeze magnetic float pairs well with fresh evaporative cooler filter pads and a replacement pump if you're undertaking a full seasonal service. You might also consider checking your evaporative cooler wall controller for any signs of wear or malfunction.