Coolbreeze M240 Mobile Control Board

This is the genuine Coolbreeze M240 mobile control board, part number CBSP3013. It's the brain of your mobile evaporative cooler, managing everything from fan speeds to water pump operation. When your M240 starts acting up, often it's a board issue, and having a spare on hand can save a hot summer day on a job site or in the workshop.

Keeping these older, reliable units running strong is smart. A failing PCB can cause intermittent faults or complete shutdown, which is the last thing you want during an Aussie summer.

Best For

This Coolbreeze M240 control board is ideal for:

• HVAC service techs maintaining Coolbreeze evaporative coolers.
• Facility managers or maintenance teams with M240 mobile units.
• Competent DIY owners repairing their own Coolbreeze M240.

Compatibility

This control board (part number CBSP3013 or CoolBreeze PN: SP3013) is specifically designed for the Coolbreeze M240 mobile evaporative cooler model. It's a direct replacement for the original PCB.

If you're running a different Coolbreeze model, or any other brand, double-check your unit's existing board part number before ordering to ensure a correct fit.

Features

• Genuine Coolbreeze Part: Ensures perfect fit and reliable operation with your M240 unit.
• Direct Replacement: Designed as a plug-and-play swap for the original control board.
• Essential System Control: Manages fan speed, pump functions, and other core operations of your mobile cooler.
• PCB Board Design: Standard printed circuit board construction for evaporative cooler applications.

What's in the Box

• 1 x Coolbreeze M240 Mobile Control Board (CBSP3013)

Using It on the Job

Replacing a control board requires careful electrical work. Follow these steps:

1. Isolate Power: Always disconnect the cooler from mains power at the wall or circuit breaker before opening the unit. Use a lockout/tagout procedure if working in a commercial setting.
2. Access Panel: Carefully remove the access panel to expose the existing control board.
3. Document Connections: Take photos of all wiring connections to the old board. Label wires if necessary to avoid errors during reassembly.
4. Remove Old Board: Disconnect all wiring and mounting screws holding the faulty board in place.
5. Install New Board: Mount the new CBSP3013 board securely and meticulously reconnect all wires according to your documentation. Double-check every connection.
6. Test Operation: Replace the access panel, restore power, and test all cooler functions (fan speeds, pump, swing) to ensure correct operation.

Limitations & Safety Notes

• This board is only for the Coolbreeze M240 mobile evaporative cooler; it is not cross-compatible with other models or brands.
• All electrical work should be performed by a qualified tradesperson. Serious injury or damage can result from improper installation.
• Always ensure power is completely disconnected and locked out before attempting any repair or component replacement.
• Refer to the Coolbreeze M240 service manual for specific wiring diagrams and troubleshooting steps.

Before you swap out the board, check all your external wiring connections and make sure the wall controller isn't the problem. Sometimes a simple loose connection or a faulty wall thermostat can mimic a dead control board, saving you the hassle of a replacement.

Pair With

Consider pairing this control board with replacement filter pads or a new pump motor if your Coolbreeze M240 needs a full refresh. You might also find other Coolbreeze spare parts in our Evaporative Cooler Spares section.