Coolbreeze Evaporative Cooler Pad Set (4-Pack)

This set of four genuine Coolbreeze evaporative cooler pads brings fresh air and efficient cooling back to your unit. Designed for Australian conditions, these pads help maintain optimal performance and air quality in your home or workshop.

In a hot Aussie summer, you need your evap cooler running right. Swapping out old, gunked-up pads for a fresh set like these is a simple job that makes a huge difference to air flow and cooling efficiency.

Best For

• HVAC service technicians replacing worn out pads.

• Homeowners maintaining their Coolbreeze evaporative cooler.

• Property managers refreshing rental units.

Compatibility

These genuine FILCEL™ cellulose pads are specifically designed to fit Coolbreeze F/D 160 Heritage evaporative cooler models that use pads with channels. The dimensions are 828mm wide, 458mm high, and 100mm thick. If you're running a different model, check fittings and specs before ordering.

Features

• Australian Made: Crafted from high-quality paper and resins right here in Australia, ensuring local standards and quick supply.

• Antibacterial Treatment: Pre-treated to kill 99% of airborne germs, viruses, bacteria, mould, fungus, and spores, promoting cleaner air.

• Bonus Tank Treatment: Includes an antibacterial tank treatment to keep the water system clean.

• Fast Wetting: Engineered for rapid water absorption, which means faster cooling performance when the unit kicks in.

• Durable & Self-Supporting: Designed to last and hold their shape within the cooler frame, making installation easier.

Technical Specifications

What's in the Box

• Four (4) Coolbreeze Evaporative Cooler Pads (828mm x 458mm x 100mm)

• One (1) Bonus Antibacterial Tank Treatment

Using It on the Job

1. Safety First: Before you start, always isolate power to the evaporative cooler at the mains and confirm it's off with a lockout tag. Wear appropriate PPE, like gloves, as old pads can be pretty grim.

2. Access Panels: Remove the cooler's side panels to get to the old pads. Be careful not to damage any wiring or water lines.

3. Remove Old Pads: Carefully slide out the old pads. It's often easier if you let them dry out a bit first. Clean out any debris or scale from the cooler's water tank and pad frames while you have it open.

4. Install New Pads: Slide the new FILCEL pads into place, ensuring they sit flush and securely within their channels. Check orientation if indicated.

5. Add Treatment: Follow instructions for the included antibacterial tank treatment and add it to the cooler's water reservoir.

6. Test Run: Replace the access panels, restore power, and run the cooler to check for proper water distribution and cooling performance.

Limitations & Safety Notes

• Ensure power is isolated before servicing any evaporative cooler components.

• These pads are specifically sized for Coolbreeze F/D 160 Heritage models; confirm dimensions if your unit is different.

• Dispose of old pads responsibly according to local council guidelines.

• While the treatment is safe for people and pets, avoid direct contact with concentrated chemicals.

Tradie Pro Tip

When you're fitting new pads, give the whole inside of the cooler a good scrub. Pay attention to the water distribution tray and the tank. A clean system makes these new pads last longer and perform better, especially against scale buildup in hard water areas.

Pair With

Pair with evaporative cooler cleaning solutions and replacement pumps for a full service, ensuring your unit runs efficiently all season.