Coolbreeze Evaporative Cooler Pad Set 840x495x75mm

Keep your Coolbreeze evaporative cooler running efficiently with this genuine replacement pad set. Designed to fit specific models, these cellulose pads ensure your unit continues to deliver fresh, cool air, even on a scorching Aussie summer day.

From my time on rooftops replacing these, I know a good pad makes all the difference to air quality and cooling performance. This set helps prevent issues like premature drying or bacterial build-up, which is crucial for a healthy system.

Best For

• HVAC technicians performing routine evaporative cooler maintenance.
• Facility managers maintaining commercial evaporative cooling systems.
• Competent DIY homeowners replacing worn-out pads in compatible Coolbreeze units.

Compatibility

This set of Coolbreeze evaporative cooler pads is specifically designed for Coolbreeze models with channels, including:

• CZ160
• CO160
• MB160
• MP160
• MX160

If you're running a different model, check fittings and specs before ordering.

Features

• Australian Made: Genuine FILCEL™ Cellulose pads crafted from high-quality paper and resins right here in Australia.
• Pre-treated Antibacterial: Each pad comes pre-treated to inhibit growth of airborne germs, viruses, bacteria, mould, fungus, and spores.
• Bonus Tank Treatment: Includes an extra antibacterial tank treatment to keep the water system clean and hygienic.
• Fast Wetting: Engineered for rapid water absorption, ensuring quick and effective cooling performance.
• Durable & Self-Supporting: Built to last and maintain their structure under regular operation.

Technical Specifications

What's in the Box

• 4 x Coolbreeze Evaporative Cooler Pads (840mm x 495mm x 75mm)
• 1 x Bonus Antibacterial Tank Treatment

Using It on the Job

1. Isolate Power: Always disconnect the power supply to the evaporative cooler at the mains before commencing any work. Use lockout/tagout procedures where applicable.
2. Remove Old Pads: Carefully unclip or unbolt the pad frames and remove the old, worn-out pads. Note their orientation.
3. Clean Tank & Frame: Thoroughly clean the water tank, float valve, and pad frames to remove any scale, algae, or sediment. This is crucial for optimal performance.
4. Install New Pads: Insert the new Coolbreeze pads into their respective frames, ensuring they are correctly seated and oriented. Re-secure the frames.
5. Add Tank Treatment: Pour the bonus antibacterial tank treatment into the clean water tank before refilling.
6. Restore Power & Test: Reconnect power and run the unit. Check for proper water flow over all pads and confirm efficient cooling.

Limitations & Safety Notes

• These pads are designed only for the specific Coolbreeze models listed; check your model number before purchasing.
• Always ensure the main power to the evaporative cooler is isolated before opening the unit or replacing pads.
• Follow manufacturer guidelines for installation and maintenance to ensure safe and efficient operation.
• Dispose of old pads and cleaning residue responsibly, adhering to local environmental regulations.

Tradie Pro Tip

When you're replacing evap cooler pads, don't just swap them out. Give the water tank and distribution trays a proper scrub and flush. It prevents future blockages and keeps that fresh, cool air coming without any funky smells.

Pair With

Consider pairing these pads with our range of evaporative cooler pumps and cleaning agents to ensure a complete maintenance job. You might also find general HVAC maintenance tools useful for the task.