Coolbreeze Celdek Evaporative Filter Pads with Channel

These Coolbreeze Celdek Evaporative Filter Pads with Channel (Set of 4) are essential for maintaining your evaporative cooling system. They're designed to effectively filter and cool air, helping you keep your unit running efficiently and providing fresh, conditioned air.

After a few seasons of harsh Australian summers, old pads can clog up with dust and mineral deposits, reducing airflow and cooling performance. Swapping them out is a straightforward job that makes a real difference.

Best For

• HVAC technicians servicing Coolbreeze evaporative coolers.
• Property managers performing routine evaporative system maintenance.
• Competent DIY homeowners maintaining their Coolbreeze evaporative cooling unit.

Compatibility

These filter pads are specifically designed for Coolbreeze evaporative cooling systems that utilise the Celdek filter pads with an integrated channel. If you're running a different model, check fittings and specs before ordering.

Features

• Celdek Material: Provides excellent water absorption and airflow for efficient cooling.
• Integrated Channel Design: Ensures proper water distribution and air passage.
• Pack of 4: Supplies a complete set for most standard evaporative cooler units.
• Direct Replacement: Engineered to fit compatible Coolbreeze models for hassle-free installation.

What's in the Box

• 4 x Coolbreeze Celdek Evaporative Filter Pads – With Channel

Using It on the Job

1. Power Isolation: Always isolate and lock out power to the evaporative cooler before starting work.
2. Access Panels: Carefully remove the unit's access panels to expose the old filter pads.
3. Remove Old Pads: Unclip or slide out the existing, worn pads. Note their orientation for correct reinstallation.
4. Clean & Inspect: While open, clean the water distribution tray and check for any blockages or wear on other components.
5. Install New Pads: Carefully slide the new Celdek pads into place, ensuring the channel is correctly aligned with the water distribution system.
6. Reassemble & Test: Replace access panels, restore power, and test the unit for proper operation and water flow over the pads.

Limitations & Safety Notes

• Ensure power is isolated and locked out before attempting any maintenance.
• Only use these pads in compatible Coolbreeze evaporative cooling systems as specified.
• Follow all manufacturer's instructions and local safety guidelines during installation.
• These pads are consumable items and will require periodic replacement based on usage and water quality.

Tradie Pro Tip

Before you slide those new pads in, give the water reservoir and distribution pipes a good clean-out. It helps prevent future blockages and ensures your new pads get a fresh start for maximum efficiency. Don't forget to check the pump for any build-up too.

Pair With

Pair these filter pads with other evaporative cooler parts like replacement pumps or water level sensors for a complete system overhaul. Consider a good quality cleaner specifically designed for evaporative coolers to extend the life of your unit.