Coolbreeze Barbed Solenoid Kit

This Coolbreeze Barbed Solenoid Kit (CBSP2134) is your go-to replacement for maintaining proper water flow in Coolbreeze evaporative coolers. It ensures your system's water fill and drain cycles operate smoothly, keeping the unit running efficiently, especially during those long, hot Aussie summers.

When you're out on a dusty rooftop and a solenoid valve fails, having a complete kit like this with all the necessary bits saves you a return trip to the shop. It means less downtime for your customer and less hassle for you.

Best For

• HVAC service and maintenance technicians.
• Refrigeration apprentices learning evaporative cooler repairs.
• Competent DIY homeowners maintaining their Coolbreeze evaporative coolers.

Compatibility

This kit is designed specifically for Coolbreeze evaporative coolers, replacing the CoolBreeze PN: SP2134 solenoid. It's a direct fit for models that use a barbed connection solenoid valve for water management. If you're running a different model, check fittings and specs before ordering.

Features

• Direct Replacement: Specifically designed for Coolbreeze evaporative cooler systems.
• Complete Kit: Includes the barbed solenoid, hoses, connection clips, and cables for a straightforward installation.
• Reliable Operation: Ensures precise control over water fill and drain cycles, critical for evaporative cooler performance.
• Durable Construction: Built to handle the demands of evaporative cooling environments.

What's in the Box

• 1 x Coolbreeze Barbed Solenoid (SP2134)
• Assorted Hoses
• Connection Clips
• Electrical Cables

Using It on the Job

1. Isolate Power: Always disconnect power to the evaporative cooler at the mains before starting any work.
2. Drain System: Ensure the evaporative cooler's water reservoir is drained to prevent spills.
3. Disconnect Old Solenoid: Carefully unclip existing hoses and electrical connections from the faulty solenoid. Note their orientation.
4. Install New Solenoid: Connect the new solenoid, hoses, clips, and cables, ensuring all connections are secure and watertight.
5. Test Functionality: Restore power and test the solenoid's operation, checking for any leaks or improper water flow.

Limitations & Safety Notes

• Always isolate power before working on electrical components of the evaporative cooler.
• This solenoid is for water control in evaporative cooling systems only; not suitable for refrigerant lines or gas applications.
• Ensure all hose clamps are tightened correctly to prevent leaks and water damage.
• Follow the manufacturer's installation instructions and local Australian safety standards.

Tradie Pro Tip: Before fully securing everything, briefly cycle the unit on and off to confirm the solenoid opens and closes cleanly, and that there are no weeping connections. A quick check now saves a callback later.

Pair With

Consider pairing this kit with other Evaporative Cooler Spares like new filter pads or a replacement float valve to ensure your entire system is in top condition. Having some PTFE Tape on hand for any threaded connections is always a good idea too.