Celair FILCEL Evaporative Cooler Pads LP500 Low Profile

These Celair FILCEL evaporative cooler pads are the genuine article, designed to keep your Celair LP500 Low Profile unit running clean and efficient for Australian conditions. Perfect for tradies and DIY owners doing their own maintenance, these pads come pre-treated to knock out common nasties.

In a hot Aussie summer, clean cooler pads aren't just about comfort; they're essential for healthy airflow and stopping algae build-up in the sump. I've seen plenty of old, choked-up pads that restrict airflow and make the fan work overtime. Swapping them out makes a huge difference to performance and air quality.

Best For

• Maintaining Celair LP500 Low Profile evaporative coolers.
• Ensuring optimal cooling performance.
• Improving indoor air quality by filtering contaminants.
• Routine seasonal maintenance or replacing fouled pads.

Compatibility

These genuine FILCEL pads are specifically designed to suit Celair Low Profile LP500 evaporative cooler models. They are manufactured to original specifications for a direct fit and optimal performance.

If you're running a different model, check fittings and specs before ordering.

Features

• Genuine FILCEL™ Pads: Australian owned and made for reliable quality and a perfect fit.
• Complete Pack: Supplied as a 4-pack, ready to install with fixing pins and washers.
• Antibacterial Treatment: Each pad is pre-treated, and a separate tank treatment is included.
• Germ & Mould Control: Designed to kill 99% of airborne germs, viruses, bacteria, mould, fungus, and spores.
• Safe for Environment: 100% safe for people, animals, and the environment.

Technical Specifications

What's in the Box

• 1 x 4 Pack of Celair FILCEL Filter Pads (755 x 378 x 75mm each)
• Fixing pins
• Washers
• Separate antibacterial tank treatment

Using It on the Job

1. Safety First: Always isolate power to the evaporative cooler at the main switchboard before starting any work. Use lockout procedures if working with others.
2. Remove Old Pads: Carefully unclip or unbolt the existing pads and frames. Inspect the cooler's internal components for any build-up or damage.
3. Clean the Unit: Give the water reservoir and internal panels a thorough clean to remove any scale, algae, or sediment. This helps the new pads perform better and last longer.
4. Install New Pads: Insert the new FILCEL pads, ensuring they are oriented correctly. Secure them with the supplied fixing pins and washers.
5. Add Tank Treatment: Pour the separate antibacterial tank treatment into the water reservoir as per instructions, then refill the system.
6. Test Run: Restore power and run the cooler, checking for even water distribution across all pads and proper operation.

Limitations & Safety Notes

• Always isolate power before attempting any maintenance on an evaporative cooler.
• Ensure the pads are installed correctly to maintain efficient airflow and water flow.
• Only suitable for Celair Low Profile LP500 evaporative cooler models.
• While treatments are safe, avoid direct contact with eyes and skin. Wash hands after handling.

Tradie Pro Tip: Before you reassemble everything, take the time to clean out the cooler's sump and check the float valve. A clean system with good water flow will make your new pads last much longer and prevent callbacks.

Pair With

Pair with a good set of spanners and a bucket for a complete cooler service kit. Consider adding a general-purpose cleaner for the cooler's water tank and panels.