Buy Hydraulic Oil ISO 32 – High Viscosity Index & Anti-Wear

Errecom Hydraulic Oil ISO 32 – High Viscosity Index & Anti-Wear is a dependable AW-32 fluid for lifts, rams and workshop hydraulic packs. Built for tradies who want reliable starts, solid film strength and fewer call-backs—too easy. Sizes: 500 ml, 1 L, 5 L.

Table of contents

• ✅ Key features & trade benefits
• ✅ Why this product matters
• ✅ Pro tip
• ✅ Compatibility & system info
• ✅ What’s included
• ✅ Specifications
• ✅ Warranty & returns
• ✅ FAQs
• ✅ Related products

Key features & trade benefits

• ISO VG 32 / AW-32 grade — correct viscosity for many hydraulic circuits; steady flow and film at operating temp for consistent actuation.
• High viscosity index — maintains viscosity across temperature swings, helping valves and spools behave predictably on hot days.
• Anti-wear additive package — protects pumps, gears and vanes under load to extend service life and cut downtime.
• Low pour point — dependable starts at colder ambient temps; less sluggishness on winter call-outs.
• Workshop-ready sizes — 500 ml, 1 L and 5 L to suit service vans and shop stores.

Why this product matters

On a Sydney warehouse job, a scissor lift was creeping and whining after long runs. We drained the tired fluid and filled with ISO 32 high-VI, anti-wear. Straight away the ram smoothed out and the relief stopped chattering—bloody good result. When you’re under the pump (literally), stable viscosity and AW protection mean fewer headaches and a safer site.

Building out a full setup? See our Lubricating Oil category for compressor and specialty oils to match other plant on site.

Pro tip

Use a proper charge-oil pump or decant slowly via a clean funnel and mesh. Air entrainment causes spongy response—equalise and let bubbles dissipate before load testing. No worries.

Compatibility & system info

• Use in: hydraulic power packs, rams, scissor lifts and gear/vane/piston pump systems calling for ISO VG 32 / AW-32.
• Do not use in: refrigeration/AC compressors that specify POE/PAG/mineral compressor oils—follow the OEM spec. If you need POE 32 for compressors, consider Errecom OL6012 POE 32.
• Storage & handling: keep containers sound, labelled and away from heat; follow Safe Work Australia guidance for storing hazardous chemicals. She’ll be right when it’s stored right.

What’s included

• 1 × ISO 32 hydraulic oil — your choice of 500 ml, 1 L or 5 L container.

Specifications

Warranty & returns

Backed by the manufacturer’s warranty. For delivery times and returns, see Shipping & Returns. For safe storage/handling of workplace chemicals, follow Safe Work Australia guidance.

FAQs

Q: Is AW-32 the same as ISO 32?
ISO 32 describes viscosity (≈32 cSt at 40 °C). “AW-32” usually means ISO 32 hydraulic oil with an anti-wear package. Always check the machine spec.

Q: Can I use this instead of compressor oil?
No. Compressors typically require POE, PAG or mineral compressor oils per OEM. For POE 32, see this POE option.

Q: How should I store opened containers?
Keep tightly closed, away from heat/direct sun, and follow Australian WHS chemical storage rules.

Q: What sizes are available?
500 ml, 1 L and 5 L containers for van or shop stock.

Related products

• Need clean, measured transfers? The Imperial Oil Charge Pump & Adapters Kit is a helpful match when topping up or refilling systems.
• If you specifically need compressor oil, the Errecom POE 32 keeps AC/R compressors compliant.
• For evacuation work, a dedicated vacuum pump oil is the go—don’t substitute hydraulic oil.