Brivis Gas Heater Pilot Injector 0.46mm EF15T NG (Tradie Pack of 10)

This Brivis Gas Heater Pilot Injector Tradie Pack provides ten genuine 0.46mm EF15T Natural Gas (NG) injectors (Honeywell 390686-4), essential for keeping Brivis gas heaters running reliably through the Aussie winter. It's a lifesaver for busy HVAC techs, gas fitters, and maintenance teams needing to service multiple units or have spares on hand.

Nothing's worse than a pilot light dropping out on a cold winter's night, so having a pack of these genuine parts means you can get the heat back on fast without waiting for a reorder.

Best For

• Licensed Gas Fitters
• HVAC Service & Maintenance Teams
• Brivis Gas Heater Specialists

Compatibility

This pilot injector pack is designed for Brivis gas heaters that utilise the 0.46mm EF15T Natural Gas (NG) Honeywell 390686-4 pilot injector. It's crucial for maintaining correct gas flow and ignition performance in compatible models. If you're running a different model, check fittings and specs before ordering.

Features

• Tradie Pack Quantity: Includes 10 individual pilot injectors, great for stocking the work van.
• Genuine Brivis/Honeywell Part: Ensures direct fit and reliable performance.
• 0.46mm Orifice: Precisely sized for correct gas flow on specified Brivis heaters.
• Natural Gas (NG) Specific: Optimised for natural gas systems.
• EF15T Type: Matches specific pilot assembly designs for easy replacement.

Technical Specifications

What's in the Box

• 10 x Brivis Gas Heater Injector Pilot (0.46mm, EF15T, Natural Gas, Honeywell 390686-4)

Using It on the Job

1. Isolate Services: Always turn off and tag out the gas and electrical supply to the Brivis heater before starting any work.
2. Access Pilot Assembly: Refer to the Brivis heater's service manual to safely access the pilot assembly where the injector is located.
3. Remove Old Injector: Carefully unthread and remove the existing pilot injector, noting its precise location and orientation.
4. Install New Injector: Thread the new 0.46mm NG injector into place, ensuring it's snug but not overtightened to avoid damaging threads.
5. Reassemble & Leak Check: Put the pilot assembly and heater panels back together. Conduct a thorough gas leak check using an approved leak detection solution.
6. Test Operation: Restore gas and electrical supply. Test the heater's ignition sequence and verify a stable, clear blue pilot flame.

Limitations & Safety Notes

• Licensed Installation: All gas and electrical items must be installed by a currently licensed installer in accordance with Australian standards.
• Natural Gas Only: This injector is for Natural Gas (NG) systems only. Do not use with LPG or other gas types.
• Match Specifications: Verify that the 0.46mm EF15T specification matches the requirements of the specific Brivis heater model you are servicing.
• Manufacturer Guidelines: Always follow the specific installation and safety guidelines provided in the Brivis heater's service manual.
• Post-Installation Checks: Conduct thorough gas leak detection and operational checks after any replacement of gas components.

Tradie Pro Tip

Keep a few of these 0.46mm pilot injectors in your van. They're small, easy to misplace, and a common culprit for nuisance pilot outages. Swapping one out can save you a much bigger job and a repeat call-out.

Pair With

Pair with gas leak detection fluid, a quality set of spanners, and a full gas heater service kit for efficient and safe Brivis heater maintenance.