Brivis Gas Heater Fan Flue Joiner 100mm

This Brivis fan flue joiner is a crucial spare for keeping ducted gas heaters running safely and efficiently. If you're working on a Brivis system, ensuring the flue is sealed correctly is key to preventing carbon monoxide issues and maintaining heater performance, especially after a service or when replacing a combustion fan.

A damaged or corroded flue joiner can compromise safety and lead to inefficient heating. This genuine Brivis part ensures a precise fit for reliable flue gas evacuation.

Best For

• HVAC Technicians performing gas heater service and repairs.
• Installers maintaining Brivis ducted gas heating systems.
• Competent DIY owners replacing worn components on their Brivis heater.

Compatibility

This Brivis Fan Flue Joiner (BS80065087) is designed specifically for Brivis Gas Ducted Heaters that utilise a 100mm diameter flue system. It's a direct replacement part, ensuring proper fitment and safe operation within compatible Brivis units.

If you're running a different model, check fittings and specs before ordering.

Features

• Genuine Brivis spare part for reliable performance.
• Designed for 100mm diameter flue pipe connections.
• Black finish matches original Brivis components.
• Ensures a secure and sealed connection for safe flue gas venting.

Technical Specifications

What's in the Box

• 1 x Brivis Fan Flue Joiner, 100mm

Using It on the Job

1. Before starting, ensure all power and gas supplies to the Brivis heater are isolated and locked out.
2. Carefully disconnect and remove the existing flue joiner, noting how it was oriented and connected.
3. Inspect the connecting flue components and the heater's combustion fan outlet for any corrosion, damage, or debris. Clean surfaces as needed.
4. Position the new 100mm Brivis fan flue joiner and secure it according to manufacturer guidelines, ensuring a snug, gas-tight fit.
5. Once installation is complete, restore power and gas, then run the heater through a full cycle to verify proper operation and confirm no flue gas leaks are present.

Limitations & Safety Notes

• This joiner is specifically designed for Brivis Gas Ducted Heaters and their 100mm flue systems.
• Always verify that the gas and electrical supplies are fully isolated before attempting any maintenance or installation work.
• Work on gas appliances requires appropriate training and adherence to all relevant Australian standards and Safe Work guidance.
• Periodically inspect all flue components for signs of degradation, corrosion, or damage to ensure ongoing safety.

Tradie Pro Tip

Even if the original install didn't use it, a thin bead of high-temperature flue sealant on the mating surfaces of this joiner can prevent tiny leaks. Just make sure it's rated for gas flues and apply it sparingly.

Pair With

Pair with other Brivis heating spares such as combustion fans or pressure switches, and ensure your toolkit includes a reliable gas leak detector for final checks.