Brivis Gas Control Valve Honeywell VR8204M2503

This Brivis Gas Control Valve, a genuine Honeywell VR8204M2503, is the heart of your ducted gas heater's combustion system, ensuring safe and precise fuel delivery. For techs working on residential gas heaters in Aussie homes, a reliable gas valve is crucial for efficient operation and peace of mind, especially when the winter chill hits hard. I've seen too many systems running rich or failing to ignite because of a tired old gas valve.

It’s designed as a direct replacement part, getting that Brivis system back up to spec without any dramas. Keeping quality spares on hand means less downtime for your clients.

Best For

• HVAC service technicians replacing faulty gas control valves in Brivis heating systems.
• Homeowners with technical competence undertaking DIY repairs on compatible Brivis heaters.
• Preventative maintenance stock for common Brivis ducted gas heater models.

Compatibility

• Designed for Brivis ducted heating systems.
• Suits Natural Gas applications.
• Operates on 24V electrical supply.
• Honeywell Part Number: VR8204M2503
• Brivis Part Numbers: 80017739, B017739

If you're running a different model, check fittings and specs before ordering.

Features

• Genuine Brivis Part: Ensures perfect fit and function as a direct replacement.
• Honeywell Reliability: Manufactured by Honeywell, a trusted name in gas controls, for dependable operation.
• Natural Gas Specific: Factory set for safe and efficient use with natural gas heating systems.
• 24V Operation: Compatible with standard low-voltage heater control circuits.

Technical Specifications

What's in the Box

• 1x Brivis Gas Control Valve Honeywell VR8204M2503 (BS80017739)

Using It on the Job

1. Safety First: Before you touch anything, shut off the gas supply at the meter and isolate electrical power to the heater. Tag out your lockout.
2. Access: Carefully remove the heater's access panels to expose the existing gas valve.
3. Disconnect: Disconnect all electrical wiring and gas pipe connections from the old valve. Be ready for any residual gas in the line.
4. Install New Valve: Mount the new Brivis Honeywell gas valve in place, ensuring all mounting screws are secure.
5. Reconnect: Reconnect gas pipes, using new thread sealant appropriate for natural gas. Connect all electrical wiring, double-checking the wiring diagram.
6. Leak Test & Test Run: Restore gas and electrical supply. Perform a thorough gas leak test using an approved leak detection solution. Then, cycle the heater through its operation to confirm proper function.

Limitations & Safety Notes

• This valve is for Natural Gas systems only. Do not attempt to use on LPG systems without proper conversion and certification.
• Installation and servicing of gas appliances must be carried out by a licensed gas fitter in accordance with Australian standards and local regulations.
• Always ensure gas and electrical supplies are isolated and locked out before commencing work.
• Double-check the part number against your existing valve or heater manual to ensure compatibility.

Tradie Pro Tip: Always double-check your connections for leaks with an approved gas leak detector solution after fitting a new gas valve. Even a tiny weep can turn into a big problem, and safety is paramount on any gas job.

Pair With

Pair this gas valve with new thread sealant, a quality gas leak detector, and a Brivis ignitor or pressure switch if you're doing a full service on an older heating system. You might also check related Brivis Control Boards for overall system health.