Brivis Filter Pads Profiler Promina Series

These Brivis filter pads are designed to keep your Brivis ducted heating or cooling system running clean and efficient. As a core component for air quality, replacing these regularly helps maintain system performance and extends the life of other parts. Out here in Australia, dust and allergens can build up quickly, so a fresh set of filters is crucial for healthy airflow and protecting the unit's heat exchanger or evaporator coil.

Best For

These filter pads are specifically for:

• Brivis Profiler series: P53, P54
• Brivis Promina series: P54, P55, P56, P75

Compatibility

These Brivis filter pads, Brivis Part Number 81008543, are a direct fit for specific Brivis Profiler and Promina ducted systems. They're built to the original manufacturer's dimensions and specifications for proper air filtration and system performance. If you're running a different model, check fittings and specs before ordering.

Features

• Optimal Filtration: Designed to capture dust, pollen, and other airborne particles, maintaining air quality and protecting your system's internal components.
• Exact Fit: Sized precisely to 847 x 530 x 110 mm for seamless installation into compatible Brivis Profiler and Promina units.
• Genuine Part: This is Brivis PN 81008543, ensuring it meets Brivis's quality and performance standards.
• Kit Contents: Supplied as a set of four (4) pads, enough for a full replacement cycle.

Technical Specifications

What's in the Box

• 4 x Brivis Filter Pads (847x530x110mm)

Using It on the Job

1. Power Off: Always isolate power to the ducted system at the main circuit breaker before opening any access panels.
2. Locate Filter Compartment: Access the filter compartment, usually found near the return air plenum or inside the unit's cabinet.
3. Remove Old Pads: Carefully slide out the old, dirty filter pads. Note their orientation for correct installation of the new ones.
4. Install New Pads: Insert the new Brivis filter pads, ensuring they sit flush and there are no gaps for air to bypass.
5. Secure and Restore Power: Close and secure all access panels, then restore power to the system. Test operation to ensure proper airflow.

Limitations & Safety Notes

• Only use these filter pads with the specific Brivis Profiler and Promina models listed.
• Always ensure power is off and locked out before attempting any maintenance on HVAC equipment.
• Follow all manufacturer instructions for your Brivis system regarding filter replacement and maintenance schedules.
• Regular visual inspection of filter pads is recommended, especially during high pollen seasons.

Tradie Pro Tip

Don't wait for your system to get sluggish or the air quality to drop. Change these filter pads at least once a year, or more often if the unit runs constantly or you're in a dusty area. A clean filter isn't just about air quality; it’s about making your unit work less for the same output, saving power and wear and tear.

Pair With

For comprehensive system maintenance, consider checking out our range of Brivis control boards or other genuine Brivis heating spares. A good cleaning product for your system's coils wouldn't go astray either.