Brivis Filter Pads Contour Series

These Brivis Contour Series filter pads are a direct replacement for various Brivis evaporative cooling units, ensuring your system continues to deliver fresh, clean air efficiently. Anyone who's done a full evaporative service knows how crucial clean pads are for efficiency, especially heading into a long Aussie summer.

Keeping your pads in good nick means your evaporative cooler can draw air through properly, cool it effectively, and avoid putting unnecessary strain on the fan motor and water pump. It's a simple change that makes a big difference to performance and longevity.

Best For

Brivis evaporative cooler maintenance teams, HVAC technicians, property managers, and competent DIY homeowners looking to restore their Contour Series unit's performance.

Compatibility

• Brivis Contour Series models: L56, L61, L62/A, L63, L64, L65, L66, L76.

If you're running a different model, check fittings and specs before ordering.

Features

• Exact Fit: Designed as a genuine Brivis replacement for Contour Series models.
• Optimal Filtration: Ensures proper air intake and water absorption for efficient cooling.
• Standard Dimensions: Each pad measures 847mm x 618mm x 130mm.
• Complete Set: Supplied as a set of four pads to refresh your entire unit.
• Genuine Part: Brivis Part Number 81008773 for guaranteed quality and fit.

Technical Specifications

What's in the Box

• 1 x Set of 4 Brivis Filter Pads Contour Series (847X618X130)

Using It on the Job

1. Isolate Power: Always disconnect power to the evaporative cooler at the mains before starting any work.
2. Drain and Clean: Drain the water from the unit and give the water reservoir a good clean to remove any scale or sludge.
3. Remove Old Pads: Carefully unclip or slide out the old filter pads from their frames. Note their orientation.
4. Install New Pads: Slide the new Brivis filter pads into position, ensuring they are seated correctly in their frames.
5. Check & Reassemble: Double-check all clips and covers are secure. Restore power to the unit.
6. Test Operation: Run the cooler and check for proper water flow over the new pads and efficient cooling performance.

Limitations & Safety Notes

• These filter pads are specifically for the Brivis Contour Series models listed; they are not interchangeable with other brands or Brivis series.
• Always ensure the evaporative cooler's power supply is isolated and locked out before attempting any maintenance.
• Follow all manufacturer's installation guidelines and safety instructions during replacement.
• Regular cleaning of the cooler's sump and water distribution system is recommended when replacing pads to maximise performance.

Tradie Pro Tip

Dirty pads are the quickest way to reduce your cooler's effectiveness and put extra strain on the pump. Swapping them out regularly means better cooling and fewer call-backs for issues caused by blockages.

Pair With

Pair with an antimicrobial coil cleaner and replacement float valves for a complete evaporative cooler overhaul and season-ready maintenance.