Brivis Filter Pads Contour L40

This set of Brivis Contour L40 filter pads is essential for keeping your evaporative cooler working efficiently, especially during those long, hot Australian summers. Regular replacement helps ensure your unit delivers clean, fresh air, protecting both the system and your comfort.

Anyone who's tackled a summer service call on a dusty rooftop unit knows the difference a fresh set of pads makes.

Best For

• HVAC technicians and service teams
• Evaporative cooler maintenance and repair specialists
• Competent DIY owners maintaining Brivis L40 evaporative coolers

Compatibility

These filter pads are specifically designed for Brivis L40 evaporative cooler models. If you're running a different model, check fittings and specs before ordering.

Features

• Direct replacement for Brivis L40 evaporative coolers.
• Optimal dimensions of 790 x 615 x 90mm for a secure fit.
• Supplied as a complete set of four pads for full replacement.
• Helps maintain air quality and cooling efficiency.

Technical Specifications

What's in the Box

• Set of 4 Brivis Contour L40 Filter Pads (790x615x90mm)

Using It on the Job

1. Isolate power to the Brivis evaporative cooler at the mains before starting any work. Always follow lockout/tagout procedures.
2. Carefully remove the old, worn filter pads, noting their orientation for correct replacement.
3. Clean out any accumulated dirt, scale, or debris from the cooler unit's water pan and internal components.
4. Install the new Contour L40 filter pads, ensuring they sit correctly and securely in their frames.
5. Restore power and test the cooler's operation, checking for proper water flow and even air distribution.
6. Properly dispose of old pads and any collected debris according to local regulations.

Limitations & Safety Notes

• Ensure power is isolated before servicing any evaporative cooler components to prevent electrical hazards.
• Only compatible with Brivis L40 evaporative cooler models; verify your model before purchase.
• Wear appropriate PPE, such as gloves and a dust mask, when handling used filter pads due to potential mould or dust accumulation.
• Follow all manufacturer installation guidelines and Australian standards for safe and effective replacement.

When you're replacing these, always give the water pan and internal surfaces a good scrub-down with an approved evaporative cooler cleaner. It prevents mould and keeps the whole system smelling fresh and running better.

Pair With

Pair with a quality evaporative cooler cleaner and replacement float valves or pumps for a comprehensive service and maintenance kit.