Brivis Filter Pads Contour L20 (Set of 4)

These Brivis Contour L20 filter pads are your direct replacement for keeping that evaporative cooler working its best. They're built to maintain proper airflow and filter out airborne dust, ensuring your system runs efficiently and delivers clean air.

Anyone who's opened up an evap cooler after a long Australian summer knows the kind of gunk these pads collect; swapping them out is a crucial bit of maintenance for better performance and water quality.

Best For

• Owners of Brivis Contour L20 evaporative coolers
• HVAC service and maintenance technicians
• Competent DIY homeowners performing routine cooler maintenance

Compatibility

These filter pads are specifically engineered for direct fitment in Brivis Contour L20 evaporative cooler units. Their dimensions are 710mm x 530mm x 90mm. If you're running a different model, check fittings and specs before ordering.

Features

• Direct Fit: Designed for seamless replacement in Brivis Contour L20 models.
• Complete Set: Supplied as a set of four pads, ready for a full system replacement.
• Maintains Efficiency: Helps ensure optimal airflow and cooling performance for your unit.
• Air Filtration: Effectively captures dust and other airborne particles before they enter your space.
• Genuine Component: Brivis original part, identified by PN B008286.

Technical Specifications

What's in the Box

• 4x Brivis Contour L20 Filter Pads (710mm x 530mm x 90mm)

Using It on the Job

1. Isolate Power: Always begin by switching off and isolating the power supply to the evaporative cooler at the main switchboard.
2. Access Pads: Carefully remove the cooler's outer casing or access panels to expose the filter pads.
3. Remove Old Pads: Unclip or slide out the existing, dirty filter pads, taking note of their orientation for correct installation of the new ones.
4. Clean Sump: Take the opportunity to thoroughly clean the cooler's water sump, removing any sediment, algae, or scale build-up.
5. Install New Pads: Insert the new Brivis filter pads, making sure they sit firmly and in the correct orientation within their frames.
6. Reassemble & Test: Securely reassemble all panels, restore power, and test the evaporative cooler's operation.

Limitations & Safety Notes

• These filter pads are specifically designed for the Brivis Contour L20 model; verify dimensions for other Brivis evaporative coolers.
• Always ensure power is isolated and locked out before commencing any maintenance work on an evaporative cooler.
• Regular inspection and cleaning of the cooler's water system should accompany filter pad replacement.
• Incorrect installation of filter pads can lead to reduced cooling efficiency or uneven water distribution.

Before you put the new pads in, take the time to clean out the cooler's water pan properly. All that sludge and algae isn't doing your new pads any favours, and it's a good time to check the pump and dump valve too.

Pair With

Pair with evaporative cooler pumps, float valves, and antimicrobial treatments for comprehensive maintenance and to keep your system running optimally.