Brivis Fan Flue Joiner HE

This Brivis Fan Flue Joiner HE, part number BS80021341, is an essential component for maintaining the exhaust system of your Brivis gas ducted heater. It's designed to ensure a proper, sealed connection for safe flue gas venting, crucial for appliance efficiency and household safety. On an Australian rooftop, you know how important a reliable flue connection is, especially when exposed to the elements year-round.

Replacing worn or damaged flue components is part of regular maintenance, keeping your ducted gas heater running smoothly and safely for years. This is the new style, easily identified by its black finish.

Best For

• HVAC service technicians working on Brivis gas ducted heaters.
• Installers needing to replace a flue joiner during maintenance or repair.
• Competent DIY homeowners maintaining their own Brivis HE ducted gas heating system.

Compatibility

This Fan Flue Joiner is specifically designed for Brivis Gas Ducted Heaters, HE (High Efficiency) models. It is the 'new style' and comes in a black finish. This part corresponds to Brivis Part Number 80021341 and B021341.

If you're running a different model, check fittings and specs before ordering.

Features

• Genuine Brivis spare part, ensuring a perfect fit and long-term reliability.
• Designed for Brivis HE (High Efficiency) Gas Ducted Heaters.
• Identifiable as the 'new style' with a distinctive black finish.
• Direct replacement for Brivis PN: 80021341, B021341.

What's in the Box

• 1 x Brivis Fan Flue Joiner HE (BS80021341)

Using It on the Job

1. Isolate Power & Gas: Always ensure the Brivis unit's power supply and gas valve are fully isolated and locked out before commencing any work.
2. Access Unit: Carefully open the heater unit to gain access to the flue system.
3. Remove Old Joiner: Disconnect any clamps or fasteners holding the old flue joiner in place. Note its orientation and condition.
4. Install New Joiner: Position the new Brivis Fan Flue Joiner HE, ensuring a snug fit. Secure it using appropriate clamps or fasteners, verifying correct alignment.
5. Check for Leaks: After reassembly and before re-energising, perform a thorough visual inspection for any gaps. Once power and gas are restored, conduct a gas leak test around the flue connections using a suitable leak detection solution or electronic detector.
6. Test Operation: Run the heater through a full cycle, checking for proper flue gas exhaust and correct operation.

Limitations & Safety Notes

• This part is specifically for Brivis HE (High Efficiency) Gas Ducted Heaters. Do not use on incompatible models.
• Work on gas appliances must only be performed by a licensed gas fitter in accordance with AS/NZS 5601 and local regulations.
• Always isolate both electrical and gas supplies before starting any maintenance or repair work.
• Ensure all flue connections are properly sealed and tested for leaks before returning the unit to service.
• Follow all manufacturer's installation guidelines and safety instructions for your specific Brivis model.

When replacing flue components, always take a minute to check the surrounding area for corrosion or other damage. Small issues can become big problems quickly in an exhaust system. Confirm the part number on your existing component before ordering to avoid call-back delays.

Pair With

Consider pairing this with flue clamps, appropriate high-temperature sealant, and gas leak detection spray for a complete and safe installation on your Brivis heating system.