Brivis Evaporative Cooler Pad Set for AD76

This Brivis Evaporative Cooler Pad Set (BS81019092) gives you four fresh pads designed specifically for the Brivis AD76 model. Replacing worn-out pads is a basic service item that keeps your evaporative cooler running efficiently, providing better airflow and cleaner, cooler air for your space. Good quality pads stop dust and debris from being drawn into your home, which is a real bonus in the Australian climate.

Neglecting old, clogged pads not only reduces cooling capacity but can also put a strain on your pump and motor, leading to bigger bills and potential breakdowns. Swapping them out is a straightforward job that makes a big difference to comfort and system longevity.

Best For

• Owners of Brivis AD76 evaporative coolers needing routine pad replacement.
• HVAC service technicians performing maintenance on Brivis AD76 units.
• Property managers ensuring efficient cooling in residential or light commercial settings.

Compatibility

This pad set is specifically designed to suit the Brivis AD76 evaporative cooler. Each pad measures 825mm x 600mm x 100mm, ensuring a precise fit within the unit's frame. If you're running a different model, check fittings and specs before ordering.

Features

• Exact Fit: Designed to precisely fit Brivis AD76 evaporative coolers.
• Optimal Dimensions: Each pad measures 825mm (H) x 600mm (W) x 100mm (D).
• Complete Set: Comes as a convenient set of four pads, enough for a full unit replacement.
• Genuine Brivis Part: Manufactured to Brivis specifications with part number 81019092.

Technical Specifications

What's in the Box

• 4 x Brivis Evaporative Cooler Pads (825x600x100mm) for AD76

Using It on the Job

1. Always isolate power to the evaporative cooler at the main switchboard before starting any work. Don't skip this.
2. Drain the water reservoir completely and carefully remove the old, worn-out evaporative pads.
3. Thoroughly clean the cooler's water tank, pump, and distribution channels to remove any scale, algae, or sediment build-up.
4. Install the new Brivis AD76 pads, ensuring they are seated correctly and firmly within their frames to prevent bypass air.
5. Refill the water reservoir, restore power, and run the cooler. Check for even water distribution over all new pads and inspect for any leaks.
6. Properly dispose of the old pads according to local regulations.

Limitations & Safety Notes

• These pads are designed specifically for the Brivis AD76 model and may not fit other evaporative coolers.
• Always ensure the main power supply to the cooler is switched off and locked out before any maintenance.
• Follow all manufacturer's guidelines and local Safe Work practices when maintaining evaporative coolers.
• Regular inspection of water quality and cooler components will extend the life of these pads.

Tradie Pro Tip: Before you drop these new pads in, give the cooler’s water tank and distribution system a good scrub with a brush and a decent cleaner. Getting rid of the scale and sludge means the new pads will last longer, and your system will run heaps cleaner, saving you a call-out down the track.

Pair With

Pair with new evaporative cooler pumps, float valves, and antimicrobial water treatments to keep your Brivis AD76 system in top shape for reliable cooling all season.