Brivis Evaporative Cooler Pad Set (4-Pack) for AD Series

This Brivis evaporative cooler pad set (4-pack) is exactly what you need to get those AD Series units humming again. It's designed for HVAC techs and competent homeowners who want to keep their evaporative coolers running efficiently through the hot Australian summer.

I've seen enough choked-up pads to know that fresh ones make a real difference to airflow and cooling performance, ensuring you get cool, fresh air when it counts.

Best For

• HVAC Service Technicians
• Evaporative Cooler Maintenance Teams
• Competent DIY Homeowners

Compatibility

This genuine Brivis filter pad set is purpose-built for the Brivis AD Series evaporative coolers, including models AD41, AD42, AD44, AD45, AD46, and AD51. If you're running a different model, check fittings and specs before ordering.

Features

• Genuine Brivis part ensures a perfect fit and reliable performance.
• Designed specifically for AD Series evaporative coolers.
• Supplied as a complete set of four pads for a full system refresh.
• Dimensions of 875mm x 530mm x 75mm to match original specifications.

Technical Specifications

What's in the Box

• 4 x Brivis Evaporative Cooler Filter Pads (875x530x75mm)

Using It on the Job

1. Isolate power to the evaporative cooler unit at the main switchboard and ensure lockout procedures are followed.
2. Remove the old, worn evaporative pads and dispose of them responsibly.
3. Clean the inside of the cooler unit, including the water tray, to remove any build-up or debris.
4. Carefully install the new Brivis filter pads, ensuring they are seated correctly and evenly in their frames.
5. Refit any covers and restore power to the unit, then test for proper water distribution and fan operation.
6. Advise the client on the benefits of regular pad replacement for optimal cooling and air quality.

Limitations & Safety Notes

• Only compatible with Brivis AD Series evaporative coolers as listed.
• Ensure power is isolated before working on evaporative cooler units.
• Always refer to the specific Brivis cooler model's service manual for detailed instructions.
• Follow Australian safety standards and Safe Work guidance for all maintenance tasks.

Tradie Pro Tip

When you're replacing these pads, give the entire cooler tray a thorough clean. A bit of anti-microbial treatment in the water goes a long way too, especially during peak season, to keep things fresh and stop mould growth.

Pair With

Pair with a good evaporative cooler cleaner and an antimicrobial treatment for your water system. Don't forget to check your float valve and pump when you're in there, too – often worth replacing if they're showing their age.