Brivis Evaporative Cooler Filter Pads (Set of 4)

Keeping your evaporative cooler running efficiently means regular maintenance, and that includes swapping out tired filter pads. These Brivis replacement filter pads are designed to fit a range of Brivis Profiler, Promina, and Contour series coolers, ensuring your system delivers clean, fresh air through those hot Aussie summers.

Over time, filter pads collect dust, pollen, and mineral deposits, especially in hard water areas. Replacing them prevents odours and maintains the cooler's efficiency, so you're not wasting power trying to push air through clogged filters.

Best For

• HVAC service technicians replacing worn Brivis pads.
• Homeowners performing annual evaporative cooler maintenance.
• Anyone looking to improve their Brivis cooler's air quality and efficiency.

Compatibility

These filter pads are a direct fit for the following Brivis evaporative cooler models:

• CONTOUR: L21, L22/A, L23, L24, L25, L26
• PROFILER: P23, P24, P33, P44
• PROMINA: P24, P25, P26, P34, P35, P36

If you're running a different model, check fittings and specs before ordering.

Features

• Direct Replacement: Manufactured to Brivis specifications (PN 81017882) for a seamless fit in compatible models.
• Optimal Airflow: Engineered to provide efficient cooling by allowing proper air and water distribution.
• Dust Filtration: Helps to capture airborne dust and particles, improving indoor air quality.
• Enhanced Efficiency: Restores the cooler's ability to evaporate water effectively, maintaining cooling performance.

Technical Specifications

What's in the Box

• 1x Brivis Evaporative Cooler Filter Pads (Set of 4), 847x530x75mm

Using It on the Job

1. Isolate Power: Always disconnect the main power to the evaporative cooler at the switchboard before starting any work.
2. Drain System: Drain the water reservoir of the cooler and clean out any sludge or build-up.
3. Remove Old Pads: Carefully unclip or slide out the old filter pads from their frames. Note their orientation for correct installation of new pads.
4. Clean Frames: Give the filter pad frames and water distribution channels a good clean to remove any debris or mineral deposits.
5. Install New Pads: Insert the new Brivis filter pads, ensuring they are seated correctly and firmly within their frames. Double-check there are no gaps for air bypass.
6. Refill & Test: Restore power, refill the reservoir, and run the cooler through a cycle to check for proper water distribution and airflow.

Limitations & Safety Notes

• These pads are specifically for the listed Brivis Profiler, Promina, and Contour series models; they may not fit other brands or Brivis models.
• Always ensure power is isolated before working on the cooler to prevent electrical hazards.
• Proper disposal of old filter pads is recommended, especially if they are heavily soiled.
• Regular cleaning of the cooler's water reservoir and components extends the life of the unit and the pads.

Tradie Pro Tip

Always make sure the filter pads are seated correctly without gaps to prevent unfiltered air bypass. A good seal means better cooling and cleaner air, and prevents dust from getting into the ductwork.

Pair With

Consider pairing these filter pads with other Brivis Evaporative Cooler Spares like pumps or float valves, or with a quality evaporative cooler cleaning solution to keep your system in top shape.