Brivis Evaporative Cooler Filter Pad Set

This Brivis Evaporative Cooler Filter Pad Set is a straight-up replacement for your Brivis AD series unit, keeping it running clean and efficient. These pads are crucial for maintaining good air quality and effective cooling.

Anyone who's pulled apart an evap cooler in the middle of a hot Aussie summer knows how vital clean pads are for efficiency and air quality. Don't let old, clogged pads work your unit harder than it needs to.

Best For

• Replacing worn or damaged filter pads in Brivis AD series evaporative coolers.
• Routine preventative maintenance to ensure optimal cooling performance.
• Improving air quality and efficiency in residential or light commercial evaporative systems.

Compatibility

This filter pad set is purpose-built for a range of Brivis AD series evaporative coolers. It suits the following models:

• AD11, AD12, AD13, AD14, AD15, AD16
• AD21, AD22, AD23, AD24, AD26
• AD31, AD32, AD33, AD34, AD35, AD36

The pads are dimensioned at 750mm x 480mm x 75mm. If you're running a different model, check fittings and specs before ordering.

Features

• Genuine Brivis Part: Ensures perfect fit and performance specifically for Brivis AD series units.
• Optimal Dimensions: Each pad measures 750mm x 480mm x 75mm for full coverage and efficient evaporative action.
• Complete Set: Supplied as a set of four pads, allowing for a full replacement of your cooler's filters.
• Maintains Air Quality: Designed to filter dust and particles, providing cleaner, fresher cooled air.

Technical Specifications

What's in the Box

• 4 x Brivis Evaporative Cooler Filter Pads (750x480x75mm each)

Using It on the Job

1. Isolate Power: Before any work, always switch off and lock out the power to the evaporative cooler at the main switchboard.
2. Remove Old Pads: Carefully open the cooler's cover and remove the old, potentially clogged or worn filter pads. Inspect for any damage to the unit.
3. Clean Thoroughly: Use this opportunity to clean the cooler's water basin, pump filter, and water distribution channels. Remove any scale or algae build-up.
4. Install New Pads: Slide the new Brivis filter pads into place, ensuring a tight, gap-free fit. Make sure they are correctly oriented.
5. Test Operation: Secure the cooler's cover, restore power, and run the unit. Check for even water distribution over the new pads and efficient cooling.

Limitations & Safety Notes

• These pads are designed for specific Brivis AD series evaporative coolers only. Verify your model number before purchase.
• Always ensure the main power supply to the cooler is isolated and locked out before attempting any maintenance.
• Improper installation of filter pads can lead to reduced cooling efficiency or water bypass.
• Dispose of old filter pads responsibly according to local council guidelines.

Before you slot in these new pads, give the water distribution tray and filter frames a good scrub-down. Any build-up will quickly clog your fresh pads and you'll be back to square one. A clean system makes these pads last longer.

Pair With

For complete evaporative cooler maintenance, consider pairing these pads with replacement evaporative cooler pumps, float valves, and antimicrobial water treatment solutions available in the HVAC Shop.