Brivis Evap Pad Set (4-Pack) 880x430x75mm

This Brivis Evap Pad Set gives you four replacement filter pads, sized at 880x430x75mm, for your Brivis evaporative cooler. Essential for maintaining air quality and cooling efficiency, especially during those long Aussie summers when your evap cooler works overtime.

Swapping out old, gunked-up pads with fresh ones makes a big difference to your system's performance and the comfort levels in the conditioned space. It's a critical maintenance step often overlooked.

Best For

• HVAC service technicians maintaining Brivis evaporative cooling systems.
• Property managers and facility maintenance teams.
• Competent DIY homeowners servicing their own Brivis evaporative cooler.

Compatibility

This filter pad set is a direct replacement for specific Brivis evaporative cooler models. Each pad measures 880mm x 430mm x 75mm.

• Suits Brivis AD40 models.
• Suits Brivis AD50 models.
• Suits Brivis Sundowner 7, Sundowner 8, and Sundowner II 8 models.

If you're running a different model, check fittings and specs before ordering.

Features

• Exact Fit Dimensions: Each pad measures 880mm high, 430mm wide, and 75mm thick for a perfect fit in compatible units.
• Genuine Brivis Part: Manufactured to Brivis specifications (PN 81000395) ensuring optimal performance and longevity.
• Complete Set: Supplied as a four-pack, providing all necessary pads for a full replacement.
• Optimised Cooling: Designed for efficient water absorption and airflow to maximise evaporative cooling effectiveness.

Technical Specifications

What's in the Box

• 4 x Brivis Evap Filter Pads (880mm x 430mm x 75mm)

Using It on the Job

1. Isolate Power: Always ensure the evaporative cooler's power supply is completely disconnected at the mains before starting any work.
2. Access Pads: Carefully remove the unit's outer panels or grille to gain access to the old filter pads.
3. Remove Old Pads: Unclip or slide out the used pads, noting their orientation for correct installation of the new ones.
4. Clean Sump: Thoroughly clean the water sump and any internal surfaces to remove sludge and build-up before fitting new pads.
5. Install New Pads: Insert the new Brivis filter pads, making sure they are seated correctly and firmly within their frames.
6. Restore & Test: Re-secure all panels and grilles, then restore power to the unit. Test operation to ensure proper water distribution and cooling.

Limitations & Safety Notes

• Always disconnect main power to the evaporative cooler before performing any maintenance or pad replacement.
• Wear appropriate personal protective equipment (PPE), such as gloves, when handling used filter pads.
• Ensure correct pad orientation during installation for optimal airflow and cooling efficiency.
• These pads are designed for specific Brivis models; incorrect fitment may lead to reduced performance or damage.

Tradie Pro Tip

After replacing the pads, make sure to clean out the sump and check your float valve. You'd be surprised how much gunk builds up in there, and a clean system runs a lot more efficiently and lasts longer.

Pair With

Pair with replacement evaporative cooler pumps, float valves, and antimicrobial treatment to keep your Brivis system in top shape for the cooling season.