Brivis Evap Pad Set (4) 753x430x75mm

This Brivis Evaporative Cooler Filter Pad Set provides four direct replacement pads to keep your system performing at its best. Designed for specific Brivis AD and Sundowner series models, these pads are crucial for effective cooling and air filtration.

In the harsh Australian summer, clean pads are key to pulling in fresh air and delivering efficient, cool evaporative comfort. Dirty, calcified pads reduce airflow and cooling capacity significantly.

Best For

• Maintaining Brivis evaporative coolers.
• Replacing worn or clogged filter pads.
• DIY home owners and HVAC service technicians.

Compatibility

This filter pad set is specifically designed to suit the following Brivis evaporative cooler models:

• Brivis AD10
• Brivis AD20
• Brivis AD30
• Brivis Sundowner 5
• Brivis Sundowner 6
• Brivis Sundowner II 5

If you're running a different model, check fittings and specs before ordering.

Features

• Genuine Brivis Part: Ensures direct fit and optimal performance for specified models.
• Standard Dimensions: Each pad measures 753mm x 430mm x 75mm for a perfect match.
• Set of Four: Provides a complete replacement for typical evaporative cooler configurations.
• Restores Efficiency: Replacing old, calcified pads improves airflow and cooling capacity.

Technical Specifications

What's in the Box

• 4 x Brivis Evaporative Cooler Filter Pads (753x430x75mm)

Using It on the Job

1. Isolate Power: Always turn off and lockout power to the evaporative cooler at the main switchboard before starting any work.
2. Drain Water: Ensure the cooler's water reservoir is fully drained.
3. Remove Panels & Old Pads: Carefully unclip or unscrew the cooler panels and remove the old, potentially brittle or calcified filter pads.
4. Clean Internals: This is the perfect time to clean the cooler's sump, water distribution tray, and any debris inside the unit.
5. Install New Pads: Insert the new Brivis filter pads, ensuring they are seated correctly and fit snugly.
6. Reassemble: Replace the panels and secure them properly. Re-engage power and test the cooler's operation.

Limitations & Safety Notes

• These pads are only compatible with the specified Brivis models and dimensions listed.
• Always disconnect power to the unit before maintenance or replacement.
• Ensure old pads are disposed of responsibly according to local regulations.
• Follow all manufacturer guidelines and Safe Work Australia practices when servicing evaporative coolers.

When you've got the old pads out, take the extra time to thoroughly clean out the water sump and distribution channels. A buildup of scale and algae can quickly clog your new pads and reduce system effectiveness. ✓

Pair With

Consider pairing these pads with an evaporative cooler antimicrobial treatment to inhibit growth in the water system, and check your Brivis float valve or pump for wear and tear while you're servicing the unit.