Brivis Ducted Gas Heater Combustion Fan GR01405 HX Series

This is a direct replacement combustion fan for Brivis ducted gas heaters, specifically the Star Pro HX series. It’s a critical component for ensuring proper combustion and safe exhaust of flue gases, keeping the heater running efficiently.

As a tech, I know a seized or noisy combustion fan is a common call-out in winter, especially in dusty installations. Having the right part on hand saves a lot of time on site.

Best for: HVAC service technicians, gas fitters, ducted heating installers, and competent DIY owners maintaining their Brivis heating systems.

Compatibility

This combustion fan is designed as a direct replacement for Brivis ducted gas heaters in the Star Pro HX series. It is equivalent to Brivis Part Numbers GR01405, 80021370, and B021370.

If you're running a different model, check fittings and specs before ordering.

Features

• Direct replacement for Brivis part GR01405, ensuring seamless fitment.
• Specifically engineered for the Brivis Star Pro HX series ducted gas heaters.
• Maintains correct air-fuel mixture for efficient burning and safe flue gas removal.
• Matches Brivis Part Numbers 80021370 and B021370.

What's in the Box

• 1 x Brivis Combustion Fan GR01405 (Part Number BS80021370)

Using It on the Job

1. Isolate Power: Always begin by switching off power to the ducted gas heater at the main breaker. Use a lockout tagout device for safety.
2. Access Fan: Locate and carefully access the existing combustion fan within the Brivis heater cabinet.
3. Disconnect & Remove: Disconnect all electrical wiring and mounting hardware from the old fan. Make notes or take photos if needed to remember connections.
4. Install New Fan: Mount the new Brivis Combustion Fan securely in place, ensuring all electrical connections are correct and tight.
5. Test Operation: Restore power and initiate a test run of the heater, checking for proper fan operation and safe flue gas ventilation.

Limitations & Safety Notes

• Always ensure power is completely isolated and locked out before commencing any work on the heating unit.
• This fan is specifically for Brivis Star Pro HX series ducted gas heaters and may not be compatible with other models.
• Installation of gas appliance components should ideally be performed by a qualified and licensed gas fitter or HVAC technician.
• Follow all manufacturer guidelines and relevant Australian gas appliance safety standards during installation and testing.

When fitting a new combustion fan, it’s a good habit to give the entire flue system a visual check for blockages or signs of corrosion, especially if the old fan failed unexpectedly. A clean flue makes the new fan's job easier.

Pair With

Consider pairing this with other Brivis heating spares like control boards, gas valves, or pressure switches to keep common replacement parts on hand for faster service calls.