Brivis Contour Series Evaporative Cooler Filter Pads

These Brivis Contour Series filter pads are a direct replacement for your evaporative cooler, designed to keep your unit running clean and efficient. Fresh pads are crucial for maintaining good air quality and system performance, particularly in Australian conditions where dust and allergens can quickly build up.

Anyone who's pulled a dirty, clogged pad out of an old Brivis knows the immediate difference that new, clean filtration makes to cooling capacity and airflow.

Best For

• HVAC technicians performing routine evaporative cooler servicing.
• Maintenance teams for residential and light commercial properties.
• Competent DIY homeowners maintaining Brivis Contour Series evaporative cooling units.

Compatibility

These Brivis Contour Series filter pads are engineered as genuine replacements for the following Brivis evaporative cooler models:

• Brivis L41
• Brivis L42/A
• Brivis L43
• Brivis L44
• Brivis L45

If you're running a different model, check fittings and specs before ordering.

Features

• Genuine Brivis Part: Ensures perfect fit and performance as per manufacturer specifications (Brivis PN 81008322).
• Optimal Filtration: Designed to trap dust, pollen, and other airborne particles, providing cleaner air.
• Efficient Cooling: Maintains proper airflow and water absorption for effective evaporative cooling.
• Convenient Set: Supplied as a complete set of four pads for a full unit replacement.

Technical Specifications

What's in the Box

• 4 x Brivis Contour Series Filter Pads (BS81008322), 847x618x90mm

Using It on the Job

1. Isolate Power: Always switch off and lock out the main power supply to the evaporative cooler before commencing any work.
2. Remove Old Pads: Carefully unclip or unseat the old filter pads. Note their orientation to ensure the new ones are installed correctly.
3. Clean Cabinet: Take the opportunity to thoroughly clean the inside of the cooler cabinet, water distribution tray, and sump to remove any scale, algae, or sediment.
4. Install New Pads: Insert the new Brivis Contour Series filter pads, making sure they sit flush and seal properly within their frames.
5. Test System: Restore power and run the unit on a low fan setting for a few minutes, checking for even water distribution over the new pads and proper operation before handing back to the client.

Limitations & Safety Notes

• These filter pads are specifically for Brivis Contour Series evaporative coolers (L41, L42/A, L43, L44, L45). Verify your model before purchase.
• Always isolate electrical power to the unit before performing any maintenance or replacing parts to prevent electric shock.
• Follow the manufacturer's instructions in the Brivis service manual for your specific unit.
• Dispose of old filter pads responsibly.

Tradie Pro Tip

Before installing these new pads, give the water distribution system a good scrub-down. Blocked nozzles or a dirty sump can quickly compromise the effectiveness of your new filters, leading to reduced cooling and potential odours.

Pair With

For complete evaporative cooler maintenance, consider pairing these filter pads with evaporative cooler cleaning solutions, replacement pumps, or float valves available at HVAC Shop.