Brivis Contour L50 Evaporative Cooler Filter Pads (Set of 4)

This set of genuine Brivis Contour L50 filter pads (BS-CEL113CON) is a direct replacement for your evaporative cooler, helping to ensure your unit delivers clean, cool air efficiently. Keeping your pads fresh is crucial for performance and air quality, especially during a scorching Australian summer.

Blocked or degraded pads mean less cool air and more strain on the motor, leading to higher running costs and premature wear. Installing new pads is a straightforward job that makes a real difference.

Best For

• HVAC service and maintenance technicians.
• Evaporative cooler repairers.
• Competent DIY homeowners maintaining their Brivis evaporative coolers.

Compatibility

These Brivis Contour L50 filter pads are designed specifically for Brivis Contour L50 series evaporative cooling units. The dimensions are 790mm x 615mm x 110mm. If you're running a different model, check fittings and specs before ordering.

Features

• Genuine Brivis Part: Ensures perfect fit and performance in compatible units.
• Standard Dimensions: Each pad measures 790mm (H) x 615mm (W) x 110mm (D).
• L50 Series Specific: Tailored to fit Brivis Contour L50 evaporative coolers.
• Bulk Pack: Supplied as a set of four pads, allowing for a complete unit overhaul.

Technical Specifications

What's in the Box

• 4 x Brivis Contour L50 Filter Pads (BS-CEL113CON)

Using It on the Job

1. Isolate Power: Always ensure the evaporative cooler's power supply is isolated at the main switchboard before starting work.
2. Drain Cooler: Drain the water from the cooler's reservoir and disconnect any water lines if necessary for access.
3. Remove Old Pads: Carefully remove the old filter pads, noting their orientation for correct replacement.
4. Clean Internals: Take the opportunity to thoroughly clean the inside of the cooler, including the water pan and distribution channels, to remove any build-up of dirt or mould.
5. Install New Pads: Insert the new Brivis Contour L50 pads, ensuring they are seated correctly and securely.
6. Restore and Test: Reconnect water lines, restore power, and run the cooler to check for proper operation and even water distribution over the new pads.

Limitations & Safety Notes

• These filter pads are specifically for Brivis Contour L50 evaporative coolers; they are not suitable for other models or types of cooling systems.
• Always ensure the main power is isolated before working on any electrical appliance.
• Regular cleaning of the cooler's water system and correct pad maintenance will extend the life of the unit and its components.
• Follow the specific installation instructions provided by Brivis for your evaporative cooler model.

Tradie Pro Tip: Before fitting new pads, give the internal water pan a good scrub with an appropriate cleaner. A clean pan prevents mould and ensures the fresh pads stay cleaner for longer, delivering better air quality.

Pair With

Consider pairing these filter pads with other evaporative cooler spares like replacement pumps or float valves. Don't forget an antimicrobial treatment for your cooler's water to keep things clean and fresh.