Brivis Burner Zip Tube 15/52MJ

This Brivis Burner Zip Tube is a genuine replacement part for Brivis ducted gas heating systems, ensuring your unit keeps running efficiently through winter. It's crucial for correct combustion, preventing flame rollout and ensuring safe operation.

After years of service, burner components can wear, affecting ignition and heat output. Swapping out a tired zip tube like this one can restore your heater's performance and keep that warm air flowing on those chilly Australian mornings.

Best For

• HVAC heating technicians
• Licensed gasfitters
• Competent owners maintaining Brivis ducted gas heaters

Compatibility

This Brivis Burner Zip Tube is designed specifically for Brivis ducted gas heating systems that require a 15/52MJ rated zip tube. It is identified as a small, 15 PUR size component.

This part directly replaces Brivis Part Numbers 80021045 and B021045.

If you're running a different model, check fittings and specs before ordering.

Features

• Genuine Brivis replacement part ensures reliable fit and optimal function.
• Rated for 15/52MJ output, matching specifications for compatible Brivis heater models.
• Designed to ensure proper flame spread across the main burner assembly.
• Direct replacement for Brivis PN: 80021045 and B021045.

Technical Specifications

What's in the Box

• 1x Brivis Burner Zip Tube 15/52MJ (BS80021045)

Using It on the Job

1. Always isolate power and gas supply to the heater before commencing work. Implement lockout/tagout procedures as per Safe Work practices.
2. Carefully remove the combustion fan, manifold, or any panels obstructing access to the burner assembly within the heater.
3. Identify the worn or damaged zip tube. Pay attention to its orientation and how it connects to the manifold.
4. Remove any fasteners and carefully unseat the old zip tube from its position.
5. Install the new Brivis Burner Zip Tube (BS80021045), ensuring it's properly seated and secured according to manufacturer guidelines.
6. Reassemble all components, ensuring gas connections are tight and electrical connections are correctly reinstated.
7. Restore gas and power, then conduct a thorough leak check on all disturbed gas fittings before commissioning the heater and checking flame patterns.

Limitations & Safety Notes

• Installation must be performed by a qualified and licensed gasfitter or HVAC technician in Australia.
• Ensure the gas and electrical supply are fully isolated and locked out before any work begins.
• Only for use with Brivis ducted gas heaters compatible with 15/52MJ zip tube specifications.
• Always follow manufacturer's installation instructions and relevant Australian standards for gas appliance servicing.

Tradie Pro Tip

"When replacing burner components, it's a good habit to inspect the main burner manifold and heat exchanger for any signs of corrosion or blockages. Clean them up if needed while you've got everything opened up; it can save a call-back later."

Pair With

Pair with other Brivis heating spares like gas valves or ignitors, and make sure your toolkit includes a good gas leak detector for commissioning and safety checks.