Brivis 7 Bank Heat Exchanger for Buffalo Series

This genuine Brivis 7 bank heat exchanger is the core component for your Brivis Buffalo series ducted gas heater, ensuring efficient and safe operation. If you're tackling a repair on an older Buffalo unit, getting the right genuine part makes all the difference for long-term reliability in Australian conditions. We've seen plenty of old heat exchangers crack over time, so a new one keeps everything running smoothly and safely.

Best For

• HVAC technicians and licensed gas fitters
• Service and maintenance teams
• Competent DIY owners undertaking specific repairs (seek professional guidance)

Compatibility

This heat exchanger is purpose-built as a direct replacement part for Brivis Buffalo Series ducted gas heating units. It matches Brivis Part Numbers 80013215 and B013215. If you're running a different model, check fittings and specs before ordering.

Features

• Direct replacement for Brivis Part Numbers 80013215 and B013215.
• 7-bank configuration, specifically designed for Brivis Buffalo Series models.
• Genuine Brivis component ensures correct fit and optimal performance in ducted gas heating systems.
• Helps maintain original manufacturer efficiency and safety standards of the heating unit.

What's in the Box

• 1 x Brivis 7 Bank Heat Exchanger (BS80013215)

Using It on the Job

1. Always isolate the main power and gas supply to the ducted heater before beginning any work, then apply lockout/tagout procedures.
2. Carefully remove the existing heat exchanger, noting all connections, mounting points, and the path of the flue gases.
3. Inspect the furnace cabinet and surrounding components for any signs of corrosion, fatigue, or other damage before installing the new unit.
4. Install the new Brivis 7 bank heat exchanger, ensuring all seals, gaskets, and connections are correctly seated and secured according to manufacturer specifications.
5. Reconnect power and gas, then perform a mandatory gas leak test and a full operational check of the heater to confirm proper function and safety.

Limitations & Safety Notes

• Installation and servicing of gas appliances must be carried out by a licensed gas fitter in accordance with AS/NZS 5601 and local regulatory requirements.
• This heat exchanger is specifically for Brivis Buffalo series models; do not attempt to use it in incompatible units.
• Always follow the manufacturer's installation instructions and all relevant safety warnings for gas appliances.
• Ensure adequate ventilation and proper flue system operation after replacement.

When you're replacing a heat exchanger, it's a prime opportunity to thoroughly clean the blower fan and inspect the entire combustion chamber for any other potential issues. A bit of extra time here can save a call-back later.

Pair With

Pair with other Brivis Heating Spares like ignitors and sensors, or a quality gas leak detector for comprehensive servicing.