Breezair Variable Speed Icon Motor 1100W

This Breezair Variable Speed Icon Motor (SY095332) is your direct replacement for maintaining peak performance in compatible Breezair evaporative cooling units. Keeping your cooler's fan running smoothly is key to pushing cool air through the house, especially during a scorching Australian summer.

Anyone who's lugged a new motor up onto a hot roof in January knows the value of a direct fit and reliable performance. This genuine part helps avoid unexpected breakdowns and keeps your system humming efficiently.

Best For

• HVAC technicians performing evaporative cooler repairs.
• Service teams maintaining commercial or residential Breezair units.
• Competent DIY owners replacing a faulty motor in their Breezair system.

Compatibility

This variable speed motor is designed specifically for Breezair evaporative cooling units. It carries the Seeley part number 095332. Always cross-reference the part number on your existing motor or your unit's manual to ensure a precise fit.

If you're running a different model, check fittings and specs before ordering.

Features

• Genuine Breezair Part: Ensures compatibility and reliability with Breezair evaporative coolers.
• Variable Speed Operation: Allows for precise control over airflow, optimising comfort and energy use.
• 1100 Watt Power: Delivers robust performance for effective cooling across various conditions.
• Direct Replacement: Engineered to match original equipment specifications for straightforward installation.

Technical Specifications

What's in the Box

• 1 x Breezair Variable Speed Icon Motor 1100W (SY095332)

Using It on the Job

1. Isolate Power: Always disconnect and lock out the main power supply to the evaporative cooler before commencing any work.
2. Access Motor: Carefully remove the cooler's cover and any protective screens to gain access to the motor assembly.
3. Disconnect Wiring: Photograph existing wiring connections. Label wires if necessary, then safely disconnect the electrical leads from the old motor.
4. Remove Old Motor: Unbolt and carefully remove the faulty motor from its mounting. Note how the fan blade is attached.
5. Install New Motor: Mount the new Breezair Icon motor (SY095332) securely, ensuring the fan blade is correctly fitted and balanced.
6. Reconnect & Test: Reconnect all wiring according to your labels/photos. Restore power and perform a test run to confirm proper operation and fan rotation.

Limitations & Safety Notes

• This motor is designed for Breezair units only. Do not attempt to fit it to incompatible systems.
• Electrical work should always be performed by a qualified tradesperson or a competent individual with appropriate safety training.
• Ensure power is completely isolated and locked out before starting any installation or repair.
• Follow all manufacturer's instructions and local safety regulations during installation and operation.

Tradie Pro Tip

Before you even unbolt the old motor, give the fan shaft a spin by hand. If it's stiff or grinding, make sure it's the motor and not seized bearings or a damaged fan blade causing the issue. A quick check saves a lot of head-scratching later.

Pair With

Pair with new evaporative cooler pads, a replacement dump and drain valve, or a compatible Breezair wall controller to ensure your system runs like new.