Breezair Two Speed Icon Motor 1500W

This Breezair Two Speed Icon Motor is a direct replacement for 1500W units, crucial for keeping evaporative coolers running strong. If your Breezair isn't moving air like it should, a motor replacement can get it back to spec, delivering comfortable, cool air to the whole house or workshop.

Keeping evaporative coolers running efficiently through an Aussie summer means good airflow, and that starts with a reliable fan motor. This genuine part ensures your system handles the demand.

Best For

• Evaporative Cooler Service Technicians
• Homeowners with Breezair evaporative cooling units
• HVAC Apprentices and maintenance teams

Compatibility

This 1500W Two Speed Icon Motor (Seeley PN 095097) is specifically designed to suit Breezair evaporative cooling units. It's built to match the original specifications for a seamless fit and operation.

If you're running a different model, check fittings and specs before ordering.

Features

• Genuine Replacement Part: Manufactured for Breezair units (Seeley PN 095097).
• Two-Speed Operation: Provides flexible airflow control for various cooling needs.
• Robust 1500W Power: Delivers strong, consistent airflow through your evaporative cooler.
• Direct Fit: Designed for straightforward installation as a like-for-like replacement.

Technical Specifications

What's in the Box

• 1 x Breezair Two Speed Icon Motor 1500W (SY095097)

Using It on the Job

1. Isolate Power: Always disconnect and lock out the main power supply to the evaporative cooler at the switchboard before beginning any work.
2. Access Motor: Carefully open the cooler's cabinet and locate the fan motor compartment.
3. Disconnect Old Motor: Unplug or disconnect the existing motor's wiring and remove any mounting bolts or brackets. Take photos if unsure of wiring.
4. Install New Motor: Mount the new SY095097 motor securely in place, ensuring correct alignment with the fan blade.
5. Reconnect Wiring: Reattach all electrical connections, double-checking against a wiring diagram if available, to ensure correct speed selection and safe operation.
6. Test Operation: Restore power and test the cooler's fan operation at both low and high speeds to confirm proper installation and functionality.

Limitations & Safety Notes

• Always isolate electrical power before working on the evaporative cooler.
• This motor is designed for Breezair units; ensure compatibility with your specific model and existing power rating before installation.
• Incorrect wiring can damage the motor or the control board; refer to your unit's service manual.
• Follow all relevant Australian electrical safety standards and Safe Work guidance when performing repairs.

Tradie Pro Tip: Before you swap out the motor, always double-check the capacitor. A weak capacitor can make a good motor look bad and save you a bit of work if that's the real culprit.

Pair With

Pair with Breezair control boards, new filter pads, and a replacement float valve to keep your evaporative cooler running efficiently and reliably.