Breezair Icon Two Speed Motor 560W

This Breezair Icon Two Speed Motor is a direct replacement for keeping those evaporative coolers running strong. If your unit is struggling with airflow or stuck on a single speed, this 560W motor (SY095042) gets things back to spec for comfortable cooling.

Anyone who's sweated through a scorching Australian summer without a working evaporative cooler knows a good fan motor is non-negotiable. This one's built for the job, helping move serious air when it's needed most.

Best For

• HVAC service technicians replacing evaporative cooler motors.
• Evaporative cooler maintenance and repair teams.
• Competent DIY owners maintaining their Breezair units.

Compatibility

This 560W Icon motor is specifically designed to suit Breezair evaporative cooling units. It directly replaces motors with Seeley Part Number 095042. If you're running a different model, check fittings and specs before ordering.

Features

• Two-Speed Operation: Provides flexible airflow control to match cooling demands.
• Robust 560W Power: Delivers ample power for efficient fan blade rotation.
• Direct Replacement: Matches original manufacturer specifications for Breezair units.
• Genuine Part: Identified as Seeley PN 095042, ensuring compatibility and reliability.

Technical Specifications

What's in the Box

• 1 x Breezair Icon Two Speed Motor 560W (SY095042)

Using It on the Job

1. Isolate Power: Always ensure the main power to the evaporative cooler unit is isolated and locked out before commencing any work.
2. Access & Drain: Turn off the water supply, drain the unit, and carefully remove all necessary access panels to reach the motor.
3. Disconnect & Document: Disconnect the wiring from the old motor. Pay close attention to the connections, especially for the two-speed setup, and document them with photos or diagrams.
4. Remove Old Motor: Unbolt and carefully remove the faulty motor from its mounting assembly.
5. Install New Motor: Mount the new SY095042 motor securely in place, ensuring proper alignment with the fan blade.
6. Reconnect Wiring: Reconnect the electrical wiring to the new motor, following your documentation for correct two-speed operation. Double-check all terminals are tight.
7. Test & Verify: Restore power to the unit. Test both fan speeds and listen for any unusual noises. Check for proper airflow.
8. Reassemble: Replace all panels and secure them properly before handing the unit back over.

Limitations & Safety Notes

• Always isolate electrical power and follow lockout/tagout procedures before working on the unit.
• Ensure correct wiring configuration, especially for two-speed motors, to prevent damage or improper operation.
• This motor is only suitable for the compatible Breezair units specified by Seeley Part Number 095042.
• Always refer to the evaporative cooler manufacturer's service manual for specific installation guidance.

When swapping out these motors, take a photo of the original wiring before you disconnect anything. It'll save you a heap of grief when you're hooking up the new one, especially with two-speed setups. Trust me on this one.

Pair With

Consider pairing this motor with new evaporative cooler filter pads, replacement dump valves, or a compatible Breezair control board to complete your service job.